16mm Diameter Endmill, 16mm shank, 3 flutes, 32mm Length of Cut, 58 Reach (mm), Carbide, Bright Finish, HB Shank, 108mm Overal Length, 39/40/41° Helix Angle, 0.32 chamfer (mm)

6703-16.00

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 4 Overall Length, 36/38° Helix Angle, 0.024 chamfer

3053-19.05

1/8 Inch Diameter Endmill, 1/8 Shank, 3 flutes, 1/2 Length of Cut, Carbide, Bright Finish, HA/HB Shank, 2 Overall Length, 39/40/41° Helix Angle, 0.0024 chamfer

4265-3.17

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 2 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 4-1/2 Overall Length, 40° Helix Angle, 0.0157 chamfer

4258-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, 2-1/2 Reach, Carbide, nano-A Coated, HA/HB Shank, 4-1/2 Overall Length, 36/38° Helix Angle, 0.0157 chamfer

4260-12.70

3/8 Inch Diameter Endmill, 7/16 Shank, 4 flutes, 1 Length of Cut, Carbide, Bright Finish, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

3150-9.52

5/16 Inch Diameter Endmill, 5/16 Shank, 6 flutes, 13/16 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 44/45/46° Helix Angle, 0.0039 chamfer

3115-7.94

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.01 chamfer

3080-6.35

3/16 Inch Diameter Endmill, 3/16 Shank, 3 flutes, 5/8 Length of Cut, Carbide, Bright Finish, HA/HB Shank, 2 Overall Length, 39/40/41° Helix Angle, 0.0039 chamfer

4265-4.76

3/8 Inch Diameter Endmill, 3/8 Shank, 6 flutes, 1-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 45° Helix Angle, 0.0039 chamfer

3181-9.52

1/4 Inch Diameter Endmill, 1/4 Shank, 6 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.0039 chamfer

3179-6.35

1/2 Inch Diameter Endmill, 1/2 Shank, 3 flutes, 1-1/4 Length of Cut, Carbide, Bright Finish, HA/HB Shank, 3-1/2 Overall Length, 29/30/31° Helix Angle, 0.0197 chamfer

4266-12.70

16mm Diameter Endmill, 16mm shank, 3 flutes, 32mm Length of Cut, 46 Reach (mm), Carbide, Bright Finish, HA Shank, 108mm Overal Length, 29/30/31° Helix Angle, 0.5 chamfer (mm)

3470-16.00

5/16 Inch Diameter Endmill, 5 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3-1/4 Overall Length, 45° Helix Angle, 0.0039 chamfer

4264-7.94

16mm Diameter Endmill, 16mm shank, 3 flutes, 32mm Length of Cut, 58 Reach (mm), Carbide, Bright Finish, HA Shank, 108mm Overal Length, 39/40/41° Helix Angle, 0.32 chamfer (mm)

3473-16.00