3/16 Inch Diameter Endmill, 3/16 Shank, 3 flutes, 5/8 Length of Cut, Carbide, Bright Finish, HA/HB Shank, 2 Overall Length, 39/40/41° Helix Angle, 0.0039 chamfer
Aluminum is the primary material for the RF100 A variable helix end mill. The 40°/42° variable helix angles and rake face angles are optimally suited for long chipping materials as well as non-ferrous materials. Available bright finished.
Features Back To Top
- Suitable for roughing and finishing
- Up to 60% higher feed rates
- Up to 4-times longer tool life
- Vibration-free operation
- Improved workpiece surface quality
Tech Specs Back To Top
Brand | Guhring |
---|---|
Chamfer Decimal | 0.0039" |
Chamfer Metric | 0.10 mm |
Coating | Bright |
Coolant | without |
Decimal Inch (dia) | 0.1875 |
Fractional Diameter | 3/16" |
Helix Angle | 39/40/41° |
Length of Cut | 5/8 |
Material | Solid Carbide |
Metric Diameter | 4.76 mm |
Number of Flutes | 3 |
Overall Length | 2 |
Overall Length (decimal) | 2.0000 |
Overall Length (mm) | 50.8 |
Series | 4265 |
Shank Dia | 3/16 |
Shank Dia (decimal) | 0.1875 |
Shank Diameter (mm) | 4.763 |
Shank Type | HA/HB |