3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 45° Helix Angle, 0.0059 chamfer

3179-19.05

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.0098 chamfer

3113-12.70

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 3-3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 6 Overall Length, 40° Helix Angle, 0.0138 chamfer

4253-15.87

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 35/38° Helix Angle, 0.0059 chamfer

3113-7.94

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 40° Helix Angle, 0.0177 chamfer

4250-19.05

3/4 Inch Diameter Endmill, 5 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 5 Overall Length, 45° Helix Angle, 0.0059 chamfer

4264-19.05

3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 1-1/2 Length of Cut, 3 Reach, Carbide, nano-Si Coated, HA Shank, 5 Overall Length, 55° Helix Angle, 0.0059 chamfer

3183-19.05

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, 2-1/2 Reach, Carbide, FIREX Coated, HA Shank, 4-1/2 Overall Length, 35/38° Helix Angle, 0.0098 chamfer

4251-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 3 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 5 Overall Length, 40° Helix Angle, 0.0157 chamfer

4259-12.70

7/16 Inch Diameter Endmill, 7/16 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-3/4 Overall Length, 35/38° Helix Angle, 0.0079 chamfer

3114-11.11

16mm Diameter Endmill, 16mm shank, 3 flutes, 26mm Length of Cut, 42 Reach (mm), Carbide, Bright Finish, HB Shank, 92mm Overal Length, 39/40/41° Helix Angle, 0.32 chamfer (mm)

6702-16.00

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38° Helix Angle, 0.02 chamfer

3060-15.87

16mm Diameter Endmill, 16mm shank, 6 flutes, 32mm Length of Cut, Carbide, FIREX Coated, HA Shank, 92mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

3689-16.00

7.5mm Diameter Endmill, 7.5mm shank, 3 flutes, 16mm Length of Cut, Carbide, FIREX Coated, HA Shank, 63mm Overal Length, 45° Helix Angle, 0.1 chamfer (mm)

3741-7.50

1/8 Inch Diameter Endmill, 1/8 Shank, 3 flutes, 3/8 Length of Cut, Carbide, Bright Finish, HA Shank, 1-1/2 Overall Length, 45° Helix Angle, 0.002 chamfer

3172-3.17