1/2 Inch Diameter Endmill, 1/2 Shank, 3 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.0059 chamfer

3086-12.70

25mm Diameter Endmill, 25mm shank, 4 flutes, 45mm Length of Cut, 63 Reach (mm), Carbide, FIREX Coated, HA Shank, 121mm Overal Length, 35/38° Helix Angle, 0.6 chamfer (mm)

3736-25.00

1/2 in. x 1/2 in. x 1-1/2 in. x 4 in. Solid Carbide TiALN-LW 4 Flute Square End Weldon Shank .020 Corner Chamfer Width End Mill

TF4V6513015

8mm Diameter Endmill, 8mm shank, 4 flutes, 12mm Length of Cut, 21 Reach (mm), Carbide, FIREX Coated, HB Shank, 58mm Overal Length, 35/38° Helix Angle, 0.15 chamfer (mm)

3731-8.00

18mm Diameter Endmill, 18mm shank, 4 flutes, 24mm Length of Cut, 34 Reach (mm), Carbide, FIREX Coated, HB Shank, 84mm Overal Length, 35/38° Helix Angle, 0.4 chamfer (mm)

3731-18.00

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 2 Length of Cut, Carbide, Bright Finish, HA Shank, 4-1/2 Overall Length, 45° Helix Angle, 0.0039 chamfer

3175-12.70

1 x 1 x 2 x 4-1/2 Inch M42 Cobalt TiCN Coated 5-Flute General Purpose Roughing End Mill

TC620825008

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 5/8 Length of Cut, Carbide, Bright Finish, HA/HB Shank, 2 Overall Length, 40/42° Helix Angle, 0.004 chamfer

3077-4.76

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 4 Overall Length, 36/38° Helix Angle, 0.02 chamfer

3081-19.05

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.0079 chamfer

3114-9.52

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 3-1/2 Overall Length, 40° Helix Angle, 0.0138 chamfer

3096-15.87

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38° Helix Angle, 0.02 chamfer

3080-15.87

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.002 chamfer

3153-4.76

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 4 Overall Length, 36/38° Helix Angle, 0.02 chamfer

3060-19.05

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.0059 chamfer

3114-7.94