5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38° Helix Angle, 0.02 chamfer

3080-15.87

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 4 Overall Length, 36/38° Helix Angle, 0.024 chamfer

3080-19.05

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 4 Overall Length, 36/38° Helix Angle, 0.02 chamfer

3081-19.05

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38° Helix Angle, 0.02 chamfer

3081-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 2 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 4-1/2 Overall Length, 40° Helix Angle, 0.0157 chamfer

4258-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, 2-1/2 Reach, Carbide, nano-A Coated, HA/HB Shank, 4-1/2 Overall Length, 36/38° Helix Angle, 0.0157 chamfer

4260-12.70

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.01 chamfer

3080-6.35

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.01 chamfer

3080-7.94

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.012 chamfer

3080-9.52

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, 2-1/4 Reach, Carbide, nano-A Coated, HA/HB Shank, 4 Overall Length, 36/38° Helix Angle, 0.0118 chamfer

4260-9.52

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 3/8 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2 Overall Length, 36/38° Helix Angle, 0.0059 chamfer

4257-4.76

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2 Overall Length, 36/38° Helix Angle, 0.0098 chamfer

4257-6.35

1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 1/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 1-1/2 Overall Length, 36/38° Helix Angle, 0.0039 chamfer

4257-3.17

4mm Diameter Endmill, 6mm shank, 4 flutes, 8mm Length of Cut, 15 Reach (mm), Carbide, nano-A Coated, HA Shank, 54mm Overal Length, 36/38° Helix Angle, 0.15 chamfer (mm)

3804-4.00

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 3-1/2 Overall Length, 36/38° Helix Angle, 0.016 chamfer

3080-12.70