5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3-1/2 Overall Length, 35/38° Helix Angle, 0.0138 chamfer

3114-15.87

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 35/38° Helix Angle, 0.0079 chamfer

3113-9.52

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 35/38° Helix Angle, 0.0098 chamfer

3114-12.70

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.0059 chamfer

3153-12.70

7/16 x 7/16 x 5/8 x 2-1/2 Inch Solid Carbide TiAlN 4-Flute Finisher/Rougher End Mill

4V451101ANT-WP15PE

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 35/38° Helix Angle, 0.0039 chamfer

3114-4.76

6mm Diameter Endmill, 6mm shank, 3 flutes, 10mm Length of Cut, Carbide, FIREX Coated, HA Shank, 57mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

3741-6.00

5mm Diameter Endmill, 5mm shank, 3 flutes, 10mm Length of Cut, Carbide, FIREX Coated, HA Shank, 50mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

3741-5.00

1/8 Inch Diameter Endmill, 1/8 Shank, 4 flutes, 3/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 30° Helix Angle, 0.002 chamfer

3153-3.17

1 in. x 1 in. x 2-1/4 in. x 5 in. Solid Carbide TiALN-LW 4 Flute Square End Weldon Shank .020 Corner Chamfer Width End Mill

TF4V1525008

13mm Diameter Endmill, 13mm shank, 3 flutes, 22mm Length of Cut, Carbide, FIREX Coated, HA Shank, 83mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

3741-13.00

3mm Diameter Endmill, 3mm shank, 3 flutes, 7mm Length of Cut, Carbide, FIREX Coated, HA Shank, 38mm Overal Length, 45° Helix Angle, 0.05 chamfer (mm)

3741-3.00

10mm Diameter Endmill, 10mm shank, 4 flutes, 40mm Length of Cut, 48 Reach (mm), Carbide, FIREX Coated, HA Shank, 100mm Overal Length, 35/38° Helix Angle, 0.2 chamfer (mm)

3627-10.00

16mm Diameter Endmill, 16mm shank, 3 flutes, 26mm Length of Cut, Carbide, FIREX Coated, HA Shank, 92mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

3741-16.00

10mm Diameter Endmill, 10mm shank, 3 flutes, 19mm Length of Cut, Carbide, Bright Finish, HA Shank, 72mm Overal Length, 45° Helix Angle, 0.1 chamfer (mm)

3203-10.00