0.2500 in. (1/4) Shank Diameter x 100 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0440 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87699

0.3125 in. (5/16) Shank Diameter x 120 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88191

0.3125 in. (5/16) Shank Diameter x 60 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute Carbide Double Ended Tipped Off Chamfer Mill

TC88029

0.2500 in. (1/4) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0440 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88152

0.2500 in. (1/4) Shank Diameter x 100 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0440 in. Tip Diameter 2 Flute Carbide Tipped Off Chamfer Mill

TC87639

0.3125 in. (5/16) Shank Diameter x 60 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88119

0.3125 in. (5/16) Shank Diameter x 82 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute Carbide Double Ended Tipped Off Chamfer Mill

TC88047

0.3125 in. (5/16) Shank Diameter x 82 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88137

0.3125 in. (5/16) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute Carbide Double Ended Tipped Off Chamfer Mill

TC88065

0.3125 in. (5/16) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88155

0.3125 in. (5/16) Shank Diameter x 100 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88173

1.0000 in. (1) Shank Diameter x 90? Included Angle x 4.0000 in. (4) Overall Length X 0.1200 in. Tip Diameter Carbide 5 Helical Flute Aplus Coated Chamfer Mill

82662-HELICAL

0.2500 in. (1/4) Shank Diameter x 45 Degree per side Carbide AlTiN Coated 6 Flute Double Ended Chamfer Cutter

CS-250-090X

0.1250 in. (1/8) Shank Diameter x 45 Degree per side Carbide AlTiN Coated 3 Flute Double Ended Chamfer Cutter

CS-125-090X

0.2500 in. (1/4) Shank Diameter x 30 Degree per side Carbide AlTiN Coated 6 Flute Double Ended Chamfer Cutter

CS-250-060X