0.3750 in. (3/8) Shank Diameter x 120 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87714

0.3750 in. (3/8) Shank Diameter x 60 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 2 Flute Carbide Tipped Off Chamfer Mill

TC87606

0.3750 in. (3/8) Shank Diameter x 60 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87666

0.3750 in. (3/8) Shank Diameter x 100 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87702

0.3750 in. (3/8) Shank Diameter x 120 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 2 Flute Carbide Tipped Off Chamfer Mill

TC87654

0.3750 in. (3/8) Shank Diameter x 82 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 2 Flute Carbide Tipped Off Chamfer Mill

TC87618

0.3750 in. (3/8) Shank Diameter x 82 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87678

0.3750 in. (3/8) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87690

0.3750 in. (3/8) Shank Diameter x 100 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute Carbide Tipped Off Chamfer Mill

TC87762

0.3750 in. (3/8) Shank Diameter x 100 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87822

0.3750 in. (3/8) Shank Diameter x 120 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute Carbide Tipped Off Chamfer Mill

TC87774

0.3750 in. (3/8) Shank Diameter x 120 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87834

0.3750 in. (3/8) Shank Diameter x 60 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute Carbide Tipped Off Chamfer Mill

TC87726

0.3750 in. (3/8) Shank Diameter x 60 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87786

0.3750 in. (3/8) Shank Diameter x 82 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0600 in. Tip Diameter 4 Flute Carbide Tipped Off Chamfer Mill

TC87738