0.5000 in. (1/2) Shank Diameter x 90 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87813

0.5000 in. (1/2) Shank Diameter x 90 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute Carbide Tipped Off Chamfer Mill

TC87753

0.2500 in. (1/4) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0440 in. Tip Diameter 4 Flute Carbide Double Ended Tipped Off Chamfer Mill

TC88062

0.2500 in. (1/4) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0440 in. Tip Diameter 4 Flute Carbide Tipped Off Chamfer Mill

TC87747

0.5000 in. (1/2) Shank Diameter x 90 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88161

0.5000 in. (1/2) Shank Diameter x 100 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute Carbide Double Ended Tipped Off Chamfer Mill

TC87909

0.5000 in. (1/2) Shank Diameter x 100 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC87999

0.5000 in. (1/2) Shank Diameter x 120 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute Carbide Double Ended Tipped Off Chamfer Mill

TC87927

0.5000 in. (1/2) Shank Diameter x 120 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88017

0.5000 in. (1/2) Shank Diameter x 60 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute Carbide Double Ended Tipped Off Chamfer Mill

TC87855

0.5000 in. (1/2) Shank Diameter x 60 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC87945

0.5000 in. (1/2) Shank Diameter x 82 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute Carbide Double Ended Tipped Off Chamfer Mill

TC87873

0.5000 in. (1/2) Shank Diameter x 82 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC87963

0.5000 in. (1/2) Shank Diameter x 90 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute Carbide Double Ended Tipped Off Chamfer Mill

TC87891

0.2500 in. (1/4) Shank Diameter x 60 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0440 in. Tip Diameter 4 Flute Carbide Tipped Off Chamfer Mill

TC87723