CAT40 x FMA 3/4 x 6 Inch DualDRIVE Face Mill Arbor
DualDRIVE Spindles offer a one piece design that is compatible with both dual contact and standard spindles. DualDRIVE offers improved rigidity for reduced vibration and improved T.I.R. This extends feed rates up to 20% and extends tool life while reducing scrap.
Dual-Contact is a spindle option offered by some machine tool builders. Dual-contact means both the toolholder taper and the flange make contact with the spindle. The dual-contact provides increased rigidity and accuracy during machining.
Tech Specs Back To Top
| Body Width (in) | 1.69 |
|---|---|
| Body Width (mm) | 42.9 |
| Brand | Techniks |
| Coolant Supply | Optional through Arbor Screw |
| Gage Length (in) | 6 |
| Gage Length (mm) | 152.4 |
| Gage Length-Face Contact (in) | 5.875 |
| Gage Length-Face Contact (mm) | 149.23 |
| Hub Diameter (in) | 0.75 |
| Hub Diameter (mm) | 19.05 |
| Material | 8620 Steel |
| Overall Diameter (in) | 2.5 |
| Overall Diameter (mm) | 63.5 |
| Pilot Length (in) | 0.69 |
| Pilot Length (mm) | 17.5 |
| Style | Single Ended |
| Taper Type | CAT40 |
| Type | DualDRIVE Face Mill Arbor |
