1 Inch - 1.77 Inch, BT30 Face Mill Arbor
Techniks Face Mill Arbors offerr H6 arbor tolerance for less chatter and better tool life. Each arbor is lab certified for dimensional accuracy. The taper is ground to AT3 tolerance for maximum spindle contact. Face Mills are CoolBLAST compatible for coolant through capability using a Techniks coolant capable arbor screw.
Features Back To Top
- Compatible with all face mills
- H6 arbor tolerance for less chatter and better tool life
- Taper ground to AT3 tolerance for maximum spindle contact
Tech Specs Back To Top
| Body Width (in) | 2.2 |
|---|---|
| Body Width (mm) | 55.9 |
| Brand | Techniks |
| Coolant Supply | Optional through Arbor Screw |
| Gage Length (in) | 1.77 |
| Gage Length (mm) | 45 |
| Gage Length-Face Contact (in) | 1.691 |
| Gage Length-Face Contact (mm) | 43 |
| Hub Diameter (in) | 1 |
| Hub Diameter (mm) | 25.4 |
| Material | 8620 Steel |
| Overall Diameter (in) | 1.811 |
| Overall Diameter (mm) | 46 |
| Pilot Length (in) | 0.69 |
| Pilot Length (mm) | 17.5 |
| Style | Single Ended |
| Taper Type | BT30 |
| Type | Face Mill Arbor |
