CAT40 x FMA 3/4 x 4 Inch DualDRIVE Face Mill Arbor
DualDRIVE Spindles offer a one piece design that is compatible with both dual contact and standard spindles. DualDRIVE offers improved rigidity for reduced vibration and improved T.I.R. This extends feed rates up to 20% and extends tool life while reducing scrap.
Dual-Contact is a spindle option offered by some machine tool builders. Dual-contact means both the toolholder taper and the flange make contact with the spindle. The dual-contact provides increased rigidity and accuracy during machining.
Tech Specs Back To Top
Body Width (in) | 1.69 |
---|---|
Body Width (mm) | 42.9 |
Brand | Techniks |
Coolant Supply | Optional through Arbor Screw |
Gage Length (in) | 4 |
Gage Length (mm) | 101.6 |
Gage Length-Face Contact (in) | 3.875 |
Gage Length-Face Contact (mm) | 98.43 |
Hub Diameter (in) | 0.75 |
Hub Diameter (mm) | 19.05 |
Material | 8620 Steel |
Overall Diameter (in) | 2.5 |
Overall Diameter (mm) | 63.5 |
Pilot Length (in) | 0.69 |
Pilot Length (mm) | 17.5 |
Style | Single Ended |
Taper Type | CAT40 |
Type | DualDRIVE Face Mill Arbor |