5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 20° Helix Angle, 0.0197 chamfer

3190-15.87

3/16 Inch Diameter, 3/16 Inch Shank Diameter, 1-1/8 Inch Length of Cut, 4-Flute, Solid Carbide Extra Length Chipbreaker, Center Cutting End Mill

13218750

1/8 Inch Diameter, 1/8 Inch Shank Diameter, 1 Inch Length of Cut, 4-Flute, Solid Carbide Extra Length Chipbreaker, Center Cutting End Mill

13212500

0.6250 in. (5/8) Cutter Diameter x 1.6250 in. (1-5/8) Length of Cut 4 Flute Carbide Fine Pitch Square Rougher Endmill

TC20540

3/4 Inch Diameter, 3/4 Inch Shank Diameter, 3 Inch Length of Cut, 4-Flute, Solid Carbide Extra Length Chipbreaker, Center Cutting End Mill

13275000

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 20° Helix Angle, 0.0118 chamfer

3189-6.35

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 20° Helix Angle, 0.0118 chamfer

3189-7.94

3/8 Inch Diameter 4-Flute, Solid Carbide Chipbreaker, Center Cutting Tuff Cut® GP End Mill

11437500

1/2 x 1-1/2 x 4 Inch Solid Carbide 4-Flute Endmill

TC4S1R13005

3/4 x 3/4 x 1-5/8 x 3-7/8 Inch HSS-E/PM TiAlN Coated 4 Flute Endmill

TF6K0619007

5/8 (.6250) 3-Flutes TIALN Coated Solid Dura-Carb Series 3335 Alloy Steel Rougher- .030CR/ Stub

33422-FULLERTON

3/8 Inch Diameter 4-Flute, Solid Carbide TiN Coated, Chipbreaker, Center Cutting Tuff Cut® GP End Mill

11437500T

1/2 (.5000) 4-Flutes, 30° Helix TIALN Coated Solid Dura-Carb II 3975 Coarse Pitch Hogger

39604-FULLERTON

0.2500 in. (1/4) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 4 Flute Carbide Fine Pitch Square Rougher Endmill

TC20516

3/8 Inch Diameter Endmill, 3/8 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 30/32° Helix Angle, 0.012 chamfer

3082-9.52