39604-FULLERTON - 1/2 (.5000) 4-Flutes, 30° Helix TIALN Coated Solid Dura-Carb II 3975 Coarse Pitch Hogger

1/2 (.5000) 4-Flutes, 30° Helix TIALN Coated Solid Dura-Carb II 3975 Coarse Pitch Hogger

Fullerton's solid carbide 3975 Series Sinusoidal Hogger is designed as a rougher for high volume material removal in Steels, Steel Alloys, Stainless Steels and Hardened Steels.
  • Item Code: 39604-FULLERTON
  • Availability:
  • Mfg Part #: 39604
  • Brand: Fullerton

Unit Size: 1

Features Tech Specs Reviews

Features Back To Top

    • Corner Radius
    • Flute Count Varies by Diameter
    • 30� Helix
    • Sinusoidal Geometry (Corn Cob Cutters)
    • Form Relief
    • Coarse Pitch
    • Single End
    • Right Hand Spiral
    • Right Hand Cut
    • Center Cutting
    • Standard TiAlN Coating
    • Weldon Flat
    • Inch Based Tools
    • Dura Carb II (Advanced Micrograin)
    • Shank Diameter Tolerance: h6
    • Cutter Diameter Tolerance: +.000�� -.003�� / +0.00 -0.07mm

Tech Specs Back To Top

Brand Fullerton
Coating/Finish TiAlN
Coolant Through No
Decimal Diameter 0.5000"
Direction of Cut RH
End Type SE
End Type Character Designation R
Flute Length (Decimal Inch) 1.0000
Flute Length (Inch) 1
Flute Length (mm) 25.40
Flute Spiral Direction RH
Fractional Diameter 1/2"
Length Standard
Length Designator SD
Material Solid Carbide
Metric Diameter 12.70 mm
Number of Flutes 4
Overall Length (Decimal Inch) 3.0000
Overall Length (Inch) 3
Overall Length (mm) 76.20
Point End Type Corner Radius
Radius (Decimal Inch) 0.0625
Radius (mm) 1.59
Series 3975
Shank Diameter (Decimal Inch) 0.5000
Shank Diameter (Inch) 1/2
Shank Diameter (mm) 12.70
Weldon Flat Yes

Related Items Back To Top

NoImage

71012

1 Inch 6-Flute Single End Roughing Endmill

TC29524

0.3750 in. (3/8) Cutter Diameter x 0.8750 in. (7/8) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

TC29516

0.2500 in. (1/4) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

TC29532

0.5000 in. (1/2) Cutter Diameter x 1.2500 in. (1-1/4) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

TC29540

0.6250 in. (5/8) Cutter Diameter x 1.6250 in. (1-5/8) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

I4S0250T050S TIALN

1/4 in. x 1/4 in. x 1/2 in. x 2 in. Solid Carbide TiALN 4 Flute Sharp Edge Cylindrical Shank General Purpose End Mill

I4S0125T050R TIALN

1/8 in. x 1/8 in. x 1/2 in. x 1-1/2 in. Solid Carbide TiALN 4 Flute Sharp Edge Cylindrical Shank General Purpose End Mill

TC29332

0.5000 in. (1/2) Cutter Diameter x 0.6250 in. (5/8) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

82700-HELICAL

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0300 in. Radius x 0.3750 in. (3/8) Length of Cut x 4.0000 in. (4) Overall Length x 1.5000 in. (1-1/2) Reach Carbide 5 Flute Tplus Coated Coolant Through High Feed Endmill

82716

12.00 mm Cutter Diameter x 12.00 mm Shank Diameter x 0.960 mm Radius x 12.00 mm Length of Cut x 125.00 mm Overall Length x 72.00 mm Reach Carbide 5 Flute Tplus Coated Coolant Through High Feed Endmill

GMHX12RS4015

1/2 in. Diameter x 5/8 in. Length of Cut x 2-1/2 in. Overall Length x 0.015 in. Radius Carbide Stub 4 Flutes GMS2 Coated Rougher/Finisher Endmill

GMHX12R4060

1/2 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.06 in. Radius Carbide 4 Flutes GMS2 Coated Rougher/Finisher Endmill

83737

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 7.0000 in. (7) Overall Length x 4.0000 in. (4) Reach Carbide 5 Flute Tplus Coated Coolant Through High Feed Endmill

82680

3.00 mm Cutter Diameter x 3.00 mm Shank Diameter x 0.24 mm Radius x 3.00 mm Length of Cut x 50.00 mm Overall Length x 18.00 mm Reach Carbide 4 Flute Tplus Coated High Feed Endmill

82682

4.00 mm Cutter Diameter x 4.00 mm Shank Diameter x 0.320 mm Radius x 4.00 mm Length of Cut x 63.00 mm Overall Length x 16.00 mm Reach Carbide 4 Flute Tplus Coated High Feed Endmill

83730

0.1875 in. (3/16) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.1875 in. (3/16) Length of Cut x 2.5000 in. (2-1/2) Overall Length x 1.1250 in. (1-1/8) Reach Carbide 4 Flute Tplus Coated High Feed Endmill

84492

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 2.0000 in. (2) Overall Length Carbide 5 Flute Tplus Coated Combination Feed & HEM Endmill
1

I4S0125T050R UNCOATED

1/8 in. x 1/8 in. x 1/2 in. x 1-1/2 in. Solid Carbide Uncoated 4 Flute Sharp Edge Cylindrical Shank General Purpose End Mill