0.0900 in. Radius x 0.3750 in. (3/8) Head Diameter x 1.0000 in. (1) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

16090-HARVEY

0.0930 in. (3/32) Radius x 0.3750 in. (3/8) Head Diameter x 1.0000 in. (1) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

16093-C3

0.0800 in. Radius x 0.3750 in. (3/8) Head Diameter x 1.0000 in. (1) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

16080-C3

0.0900 in. Radius x 0.3750 in. (3/8) Head Diameter x 1.0000 in. (1) Neck Length 3 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

16090-C3

0.1000 in. Radius x 0.5000 in. (1/2) Head Diameter x 1.0000 in. (1) Neck Length 4 Flute AlTiN Coated Carbide 5 Deg. Flare Back Corner Rounding End Mill

16100-C3

0.1000 in. Radius x 0.5000 in. (1/2) Head Diameter x 1.0000 in. (1) Neck Length 4 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

16100-HARVEY

0.0500 in. Radius x 0.0770 in. Pilot Diameter 5 Flute ZPlus Coated Carbide 2 Deg. Flare Corner Rounding Endmill

88483

0.0620 in. (1/16) Radius x 0.1160 in. Pilot Diameter 5 Flute ZPlus Coated Carbide 2 Deg. Flare Corner Rounding Endmill

88485

0.0780 in. (5/64) Radius x 0.1460 in. Pilot Diameter 5 Flute ZPlus Coated Carbide 2 Deg. Flare Corner Rounding Endmill

88486

0.0930 in. (3/32) Radius x 0.1160 in. Pilot Diameter 5 Flute ZPlus Coated Carbide 2 Deg. Flare Corner Rounding Endmill

88487

0.1000 in. Radius x 0.1650 in. Pilot Diameter 5 Flute ZPlus Coated Carbide 2 Deg. Flare Corner Rounding Endmill

88488

0.1250 in. (1/8) Radius x 0.1770 in. (4.5 mm) Pilot Diameter 5 Flute ZPlus Coated Carbide 2 Deg. Flare Corner Rounding Endmill

88489

0.1560 in. (5/32) Radius x 0.1770 in. (4.5 mm) Pilot Diameter 5 Flute ZPlus Coated Carbide 2 Deg. Flare Corner Rounding Endmill

88490

0.1870 in. (3/16) Radius x 0.2400 in. Pilot Diameter 5 Flute ZPlus Coated Carbide 2 Deg. Flare Corner Rounding Endmill

88491

0.2500 in. (1/4) Radius x 0.2390 in. Pilot Diameter 5 Flute ZPlus Coated Carbide 2 Deg. Flare Corner Rounding Endmill

88492