0.0600 in. Radius x 0.0460 in. Pilot Diameter 2 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

31660-HARVEY

0.0200 in. Radius x 0.0600 in. Pilot Diameter Carbide 3 Flute Double Ended Corner Rounding Endmill

CRE-125-020

0.0469 in. (3/64) Radius x 0.0600 in. Pilot Diameter Carbide 3 Flute Double Ended Corner Rounding Endmill

CRE-187-047

0.1250 in. (1/8) Radius x 0.1070 in. Pilot Diameter 4 Flute Carbide 5 Deg. Flare Double Ended Corner Rounding End Mill

68125-HARVEY

0.0150 in. (1/64) Radius x 0.0470 in. (3/64) Pilot Diameter 2 Flute Carbide Double Ended Corner Rounding End Mill

46015-HARVEY

0.0800 in. Radius x 0.3750 in. (3/8) Head Diameter x 1.0000 in. (1) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

16080

0.0312 in. (1/32) Radius x 0.0600 in. Pilot Diameter Carbide 3 Flute Double Ended Corner Rounding Endmill

CRE-125-031

0.1250 in. (1/8) Radius x 0.2480 in. Pilot Diameter 3 Flute Carbide 5 Deg. Flare Corner Rounding End Mill

973008

0.1870 in. (3/16) Radius x 0.2480 in. Pilot Diameter 3 Flute Carbide 5 Deg. Flare Corner Rounding End Mill

973012

0.0500 in. Radius x 0.2500 in. (1/4) Head Diameter x 0.3750 in. (3/8) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

985050

0.0600 in. Radius x 0.3125 in. (5/16) Head Diameter x 0.4370 in. (7/16) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

985060

0.0780 in. (5/64) Radius x 0.3750 in. (3/8) Head Diameter x 0.5000 in. (1/2) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

985078

0.0930 in. (3/32) Radius x 0.3750 in. (3/8) Head Diameter x 0.5000 in. (1/2) Neck Length 3 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

985093

0.1000 in. Radius x 0.5000 in. (1/2) Head Diameter x 0.5000 in. (1/2) Neck Length 4 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

985100

0.1250 in. (1/8) Radius x 0.5000 in. (1/2) Head Diameter x 0.5000 in. (1/2) Neck Length 4 Flute Carbide 5 Deg. Flare Back Corner Rounding End Mill

985108