Features Back To Top
- Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required.
- Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions.
- Broad accuracy range extends from 10% to 100% of full scale.
- Three units of measure are available ft-lb, in-lb, and Nm.
- Three operating modes: Track Mode, Peak Hold and First Peak (for use with Click-style Torque wrenches).
- Fast sampling rate helps maintain high accuracy during torque applications.
- Each tester is built with a male square drive and also comes supplied with a female-to-female square drive adapter.
- Powered by a standard 9V battery, providing up to 50 hours run time.
- N.I.S.T. (National Institute of Standards and Technology) traceable certification supplied with each tester.
- Optional all-steel stand (J6470S) provides a strong support with minimal footprint.
- Testers meet or exceed requirements set forth in ASME B107.29
Tech Specs Back To Top
Accuracy CCW | 1% |
---|---|
Accuracy CW | 1% |
Battery Type | 9 volt included |
Box Quantity | 1 |
Box Weight [lbs] | 0.010 |
Brand | Proto |
Country of Origin | United States |
Drive Size [in] | 1/4 |
Harmonization Code | 9031808085 |
Height [in] | 4-1/2 |
Increments [Ft Lbs] | 0.01 |
Increments [In Lbs] | 0.01 |
Increments [NM] | 0.01 |
Item Height [in] | 7.500 |
Item Length [in] | 8.800 |
Item Quantity | 1 |
Item Weight [lbs] | 5.780 |
Item Width [in] | 8.300 |
Maximum Torque [Ft Lbs] | 4.17 |
Maximum Torque [In Lbs] | 50 |
Maximum Torque [Nm] | 5.65 |
Minimum Torque [Ft Lbs] | 0.42 |
Minimum Torque [In Lbs] | 5 |
Minimum Torque [Nm] | 0.56 |
N.I.S.T Certificate [variant] | J6470-C |
Overall Length [in] | 6 |
Specification_ASME | ASME B107.29 |
Style | Electronic |
Torque Range [Ft Lbs] | 0.42-4.17 |
Torque Range [In Lbs] | 5-50 |
Torque Range [Nm] | 0.56-5.65 |
UPC Code | 662679005863 |
Width [in] | 6 |