Features Back To Top
- Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or where a quick Pass/Fail check is required.
- Accuracy of +/- 1% of indicated value in both clockwise and counter clockwise directions.
- Broad accuracy range extends from 10% to 100% of full scale.
- Three units of measure are available ft-lb, in-lb, and Nm.
- Three operating modes: Track Mode, Peak Hold and First Peak (for use with Click-style Torque wrenches).
- Fast sampling rate helps maintain high accuracy during torque applications.
- Each tester is built with a male square drive and also comes supplied with a female-to-female square drive adapter.
- Powered by a standard 9V battery, providing up to 50 hours run time.
- N.I.S.T. (National Institute of Standards and Technology) traceable certification supplied with each tester.
- Optional all-steel stand (J6470S) provides a strong support with minimal footprint.
- Testers meet or exceed requirements set forth in ASME B107.29
Tech Specs Back To Top
| Accuracy CCW | 1% |
|---|---|
| Accuracy CW | 1% |
| Battery Type | 9 volt included |
| Box Quantity | 1 |
| Box Weight [lbs] | 0.010 |
| Brand | Proto |
| Country of Origin | United States |
| Drive Size [in] | 1/2 |
| Harmonization Code | 9031808085 |
| Height [in] | 4-1/2 |
| Increments [Ft Lbs] | 0.1 |
| Increments [In Lbs] | 1 |
| Increments [NM] | 0.1 |
| Item Height [in] | 7.500 |
| Item Length [in] | 8.500 |
| Item Quantity | 1 |
| Item Weight [lbs] | 6.160 |
| Item Width [in] | 8.300 |
| Maximum Torque [Ft Lbs] | 250 |
| Maximum Torque [In Lbs] | 3000 |
| Maximum Torque [Nm] | 338 |
| Minimum Torque [Ft Lbs] | 25 |
| Minimum Torque [In Lbs] | 300 |
| Minimum Torque [Nm] | 33.8 |
| N.I.S.T Certificate [variant] | J6476-C |
| Overall Length [in] | 6 |
| Specification_ASME | ASME B107.29 |
| Style | Electronic |
| Torque Range [Ft Lbs] | 25-250 |
| Torque Range [In Lbs] | 300-3000 |
| Torque Range [Nm] | 33.8-338 |
| UPC Code | 662679005894 |
| Width [in] | 6 |
