1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/37/38° Helix Angle, 0.0098 chamfer

6757-6.35

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.0039 chamfer

3093-6.35

1/4 Inch Diameter Endmill, 1/4 Shank, 3 flutes, 3/4 Length of Cut, Carbide, Bright Finish, HA/HB Shank, 2-1/2 Overall Length, 39/40/41° Helix Angle, 0.0051 chamfer

4265-6.35

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.01 chamfer

3080-6.35

1/4 Inch Diameter Endmill, 1/4 Shank, 6 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.0039 chamfer

3179-6.35

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2 Overall Length, 36/38° Helix Angle, 0.0098 chamfer

4257-6.35

1/4 x 1/4 x 3/8 x 2 Inch Solid Carbide TiAlN 4-Flute Finisher/Rougher End Mill

TF4V4507002

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.01 chamfer

3053-6.35

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.012 chamfer

3060-6.35

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, 1-3/4 Reach, Carbide, nano-A Coated, HA/HB Shank, 3-1/4 Overall Length, 36/38° Helix Angle, 0.0098 chamfer

4260-6.35

1/4 Inch Diameter Endmill, 1/4 Shank, 6 flutes, 3/4 Length of Cut, Carbide, nano-Si Coated, HA Shank, 2-1/2 Overall Length, 55° Helix Angle, 0.0039 chamfer

3182-6.350

1/4 Inch Diameter Endmill, 1/4 Shank, 6 flutes, 3/4 Length of Cut, 1-1/2 Reach, Carbide, nano-Si Coated, HA Shank, 3 Overall Length, 55° Helix Angle, 0.0039 chamfer

3183-6.350

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 48° Helix Angle, 0.004 chamfer

6773-6.35

1/4 Inch Diameter Endmill, 1/4 Shank, 2 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 30° Helix Angle, 0.0039 chamfer

3092-6.35

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 35/38° Helix Angle, 0.0059 chamfer

3113-6.35

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, HA/HB Shank, 2-1/2 Overall Length, 40/42° Helix Angle, 0.006 chamfer

3077-6.350

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 40/42° Helix Angle, 0.006 chamfer

3078-6.350

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.012 chamfer

3081-6.350

1/4 x 1/4 x 3/4 x 2-1/2 Inch Solid Carbide TiAlN 4-Flute Finisher/Rougher End Mill

TF4V0507002

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

3153-6.35

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1-5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 30° Helix Angle, 0.0039 chamfer

3155-6.35

1/4 Inch Diameter Endmill, 1/4 Shank, 6 flutes, 1-1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 45° Helix Angle, 0.0039 chamfer

3181-6.35

1/4 x 3/8 x 5/8 x 2-7/16 Inch M42 Cobalt TiCN Coated 4-Flute General Purpose Roughing End Mill

TC620607014

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2 Overall Length, 40° Helix Angle, 0.0059 chamfer

3095-6.35

1/4 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 3/4 Length of Cut, Carbide, Bright Finish, HA Shank, 2-1/2 Overall Length, 30° Helix Angle, 0.0039 chamfer

3150-6.35