1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 3/4 Length of Cut, Carbide, HA/HB Shank, 2-1/2 Overall Length, 40/42° Helix Angle, 0.006 chamfer
Aluminum is the primary material for the RF100 A variable helix end mill. The 40°/42° variable helix angles and rake face angles are optimally suited for long chipping materials as well as non-ferrous materials. Available bright finished.
Features Back To Top
- Suitable for roughing and finishing
- Up to 60% higher feed rates
- Up to 4-times longer tool life
- Vibration-free operation
- Improved workpiece surface quality
Tech Specs Back To Top
| Brand | Guhring |
|---|---|
| Chamfer Decimal | 0.0060" |
| Chamfer Metric | 0.15 mm |
| Decimal Inch (dia) | 0.2500 |
| Fractional Diameter | 1/4" |
| Helix Angle | 40/42° |
| Length of Cut | 3/4 |
| Material | Solid Carbide |
| Metric Diameter | 6.35 mm |
| Number of Flutes | 4 |
| Overall Length | 2-1/2 |
| Overall Length (decimal) | 2.5 |
| Overall Length (mm) | 63.5 |
| Series | 3077 |
| Shank Dia | 1/4 |
| Shank Dia (decimal) | 0.2500 |
| Shank Diameter (mm) | 6.35 |
| Shank Type | HA/HB |
