Corner Chamfer Endmills

Relevance Popularity Item Code
Showing: 1-50 of 386
15 25 50
6757-4.76 - 3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 3/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2 Overall Length, 36/37/38° Helix Angle, 0.0059 chamfer

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 3/8 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 2 Overall Length, 36/37/38° Helix Angle, 0.0059 chamfer

6757-4.76

Brand: Guhring

Unit Size: 1

Availability:

4264-12.70 - 1/2 Inch Diameter Endmill, 5 flutes, 2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 4-1/2 Overall Length, 45° Helix Angle, 0.0059 chamfer

1/2 Inch Diameter Endmill, 5 flutes, 2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 4-1/2 Overall Length, 45° Helix Angle, 0.0059 chamfer

4264-12.70

Brand: Guhring

Unit Size: 1

Availability:

3181-12.70 - 1/2 Inch Diameter Endmill, 1/2 Shank, 6 flutes, 2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4-1/2 Overall Length, 45° Helix Angle, 0.0059 chamfer

1/2 Inch Diameter Endmill, 1/2 Shank, 6 flutes, 2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4-1/2 Overall Length, 45° Helix Angle, 0.0059 chamfer

3181-12.70

Brand: Guhring

Unit Size: 1

Availability:

4257-4.76 - 3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 3/8 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2 Overall Length, 36/38° Helix Angle, 0.0059 chamfer

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 3/8 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2 Overall Length, 36/38° Helix Angle, 0.0059 chamfer

4257-4.76

Brand: Guhring

Unit Size: 1

Availability:

3804-4.00 - 4mm Diameter Endmill, 6mm shank, 4 flutes, 8mm Length of Cut, 15 Reach (mm), Carbide, nano-A Coated, HA Shank, 54mm Overal Length, 36/38° Helix Angle, 0.15 chamfer (mm)

4mm Diameter Endmill, 6mm shank, 4 flutes, 8mm Length of Cut, 15 Reach (mm), Carbide, nano-A Coated, HA Shank, 54mm Overal Length, 36/38° Helix Angle, 0.15 chamfer (mm)

3804-4.00

Brand: Guhring

Unit Size: 1

Availability:

3182-19.050 - 3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 1-1/2 Length of Cut, Carbide, nano-Si Coated, HA Shank, 4 Overall Length, 55° Helix Angle, 0.0059 chamfer

3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 1-1/2 Length of Cut, Carbide, nano-Si Coated, HA Shank, 4 Overall Length, 55° Helix Angle, 0.0059 chamfer

3182-19.050

Brand: Guhring

Unit Size: 1

Availability:

3898-16.00 - 16mm Diameter Endmill, 16mm shank, 5 flutes, 48mm Length of Cut, 58 Reach (mm), Carbide, FIREX Coated, HB Shank, 108mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

16mm Diameter Endmill, 16mm shank, 5 flutes, 48mm Length of Cut, 58 Reach (mm), Carbide, FIREX Coated, HB Shank, 108mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

3898-16.00

Brand: Guhring

Unit Size: 1

Availability:

3114-7.94 - 5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.0059 chamfer

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 35/38° Helix Angle, 0.0059 chamfer

3114-7.94

Brand: Guhring

Unit Size: 1

Availability:

4258-4.760 - 3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 40° Helix Angle, 0.0059 chamfer

3/16 Inch Diameter Endmill, 3/16 Shank, 4 flutes, 3/4 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 40° Helix Angle, 0.0059 chamfer

4258-4.760

Brand: Guhring

Unit Size: 1

Availability:

3473-16.00 - 16mm Diameter Endmill, 16mm shank, 3 flutes, 32mm Length of Cut, 58 Reach (mm), Carbide, Bright Finish, HA Shank, 108mm Overal Length, 39/40/41° Helix Angle, 0.32 chamfer (mm)

16mm Diameter Endmill, 16mm shank, 3 flutes, 32mm Length of Cut, 58 Reach (mm), Carbide, Bright Finish, HA Shank, 108mm Overal Length, 39/40/41° Helix Angle, 0.32 chamfer (mm)

3473-16.00

Brand: Guhring

Unit Size: 1

Availability:

3179-19.05 - 3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 45° Helix Angle, 0.0059 chamfer

3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 45° Helix Angle, 0.0059 chamfer

3179-19.05

Brand: Guhring

Unit Size: 1

Availability:

3113-7.94 - 5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 35/38° Helix Angle, 0.0059 chamfer

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 35/38° Helix Angle, 0.0059 chamfer

3113-7.94

Brand: Guhring

Unit Size: 1

Availability:

4264-19.05 - 3/4 Inch Diameter Endmill, 5 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 5 Overall Length, 45° Helix Angle, 0.0059 chamfer

3/4 Inch Diameter Endmill, 5 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 5 Overall Length, 45° Helix Angle, 0.0059 chamfer

4264-19.05

Brand: Guhring

Unit Size: 1

Availability:

3183-19.05 - 3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 1-1/2 Length of Cut, 3 Reach, Carbide, nano-Si Coated, HA Shank, 5 Overall Length, 55° Helix Angle, 0.0059 chamfer

3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 1-1/2 Length of Cut, 3 Reach, Carbide, nano-Si Coated, HA Shank, 5 Overall Length, 55° Helix Angle, 0.0059 chamfer

3183-19.05

Brand: Guhring

Unit Size: 1

Availability:

6702-16.00 - 16mm Diameter Endmill, 16mm shank, 3 flutes, 26mm Length of Cut, 42 Reach (mm), Carbide, Bright Finish, HB Shank, 92mm Overal Length, 39/40/41° Helix Angle, 0.32 chamfer (mm)

16mm Diameter Endmill, 16mm shank, 3 flutes, 26mm Length of Cut, 42 Reach (mm), Carbide, Bright Finish, HB Shank, 92mm Overal Length, 39/40/41° Helix Angle, 0.32 chamfer (mm)

6702-16.00

Brand: Guhring

Unit Size: 1

Availability:

3689-16.00 - 16mm Diameter Endmill, 16mm shank, 6 flutes, 32mm Length of Cut, Carbide, FIREX Coated, HA Shank, 92mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

16mm Diameter Endmill, 16mm shank, 6 flutes, 32mm Length of Cut, Carbide, FIREX Coated, HA Shank, 92mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

3689-16.00

Brand: Guhring

Unit Size: 1

Availability:

3148-10.72 - 27/64 Inch Diameter Endmill, 7/16 Shank, 2 flutes, Carbide, FIREX Coated, HA Shank, 2-3/4 Overall Length, 30° Helix Angle, 0.0059 chamfer

27/64 Inch Diameter Endmill, 7/16 Shank, 2 flutes, Carbide, FIREX Coated, HA Shank, 2-3/4 Overall Length, 30° Helix Angle, 0.0059 chamfer

3148-10.72

Brand: Guhring

Unit Size: 1

Availability:

3148-10.32 - 13/32 Inch Diameter Endmill, 7/16 Shank, 2 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-3/4 Overall Length, 30° Helix Angle, 0.0059 chamfer

13/32 Inch Diameter Endmill, 7/16 Shank, 2 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-3/4 Overall Length, 30° Helix Angle, 0.0059 chamfer

3148-10.32

Brand: Guhring

Unit Size: 1

Availability:

3148-12.70 - 1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.0059 chamfer

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.0059 chamfer

3148-12.70

Brand: Guhring

Unit Size: 1

Availability:

3182-15.87 - 5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 1-1/4 Length of Cut, Carbide, nano-Si Coated, HA Shank, 3-1/2 Overall Length, 55° Helix Angle, 0.0059 chamfer

5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 1-1/4 Length of Cut, Carbide, nano-Si Coated, HA Shank, 3-1/2 Overall Length, 55° Helix Angle, 0.0059 chamfer

3182-15.87

Brand: Guhring

Unit Size: 1

Availability:

3113-6.35 - 1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 35/38° Helix Angle, 0.0059 chamfer

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 2 Overall Length, 35/38° Helix Angle, 0.0059 chamfer

3113-6.35

Brand: Guhring

Unit Size: 1

Availability:

3011-12.000 - 12mm Diameter Endmill, 12mm shank, 2 flutes, 45mm Length of Cut, Carbide, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

12mm Diameter Endmill, 12mm shank, 2 flutes, 45mm Length of Cut, Carbide, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

3011-12.000

Brand: Guhring

Unit Size: 1

Availability:

3011-14.000 - 14mm Diameter Endmill, 14mm shank, 2 flutes, 45mm Length of Cut, Carbide, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

14mm Diameter Endmill, 14mm shank, 2 flutes, 45mm Length of Cut, Carbide, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

3011-14.000

Brand: Guhring

Unit Size: 1

Availability:

3011-14.001 - 14mm Diameter Endmill, 16mm shank, 2 flutes, 65mm Length of Cut, Carbide, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

14mm Diameter Endmill, 16mm shank, 2 flutes, 65mm Length of Cut, Carbide, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

3011-14.001

Brand: Guhring

Unit Size: 1

Availability:

3011-16.000 - 16mm Diameter Endmill, 16mm shank, 2 flutes, 65mm Length of Cut, Carbide, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

16mm Diameter Endmill, 16mm shank, 2 flutes, 65mm Length of Cut, Carbide, HA Shank, 150mm Overal Length, 30° Helix Angle, 0.15 chamfer (mm)

3011-16.000

Brand: Guhring

Unit Size: 1

Availability:

3146-12.70 - 1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 1 Length of Cut, Carbide, Bright Finish, HA Shank, 3 Overall Length, 30° Helix Angle, 0.0059 chamfer

1/2 Inch Diameter Endmill, 1/2 Shank, 2 flutes, 1 Length of Cut, Carbide, Bright Finish, HA Shank, 3 Overall Length, 30° Helix Angle, 0.0059 chamfer

3146-12.70

Brand: Guhring

Unit Size: 1

Availability:

3146-19.05 - 3/4 Inch Diameter Endmill, 3/4 Shank, 2 flutes, 1-1/2 Length of Cut, Carbide, Bright Finish, HA Shank, 4 Overall Length, 30° Helix Angle, 0.0059 chamfer

3/4 Inch Diameter Endmill, 3/4 Shank, 2 flutes, 1-1/2 Length of Cut, Carbide, Bright Finish, HA Shank, 4 Overall Length, 30° Helix Angle, 0.0059 chamfer

3146-19.05

Brand: Guhring

Unit Size: 1

Availability:

3179-15.87 - 5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3-1/2 Overall Length, 45° Helix Angle, 0.0059 chamfer

5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3-1/2 Overall Length, 45° Helix Angle, 0.0059 chamfer

3179-15.87

Brand: Guhring

Unit Size: 1

Availability:

3156-15.87 - 5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 30° Helix Angle, 0.0059 chamfer

5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 30° Helix Angle, 0.0059 chamfer

3156-15.87

Brand: Guhring

Unit Size: 1

Availability:

3181-15.87 - 5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 45° Helix Angle, 0.0059 chamfer

5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 45° Helix Angle, 0.0059 chamfer

3181-15.87

Brand: Guhring

Unit Size: 1

Availability:

3096-7.94 - 5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 40° Helix Angle, 0.0059 chamfer

5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2-1/2 Overall Length, 40° Helix Angle, 0.0059 chamfer

3096-7.94

Brand: Guhring

Unit Size: 1

Availability:

3095-6.35 - 1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2 Overall Length, 40° Helix Angle, 0.0059 chamfer

1/4 Inch Diameter Endmill, 1/4 Shank, 4 flutes, 1/2 Length of Cut, Carbide, FIREX Coated, HA/HB Shank, 2 Overall Length, 40° Helix Angle, 0.0059 chamfer

3095-6.35

Brand: Guhring

Unit Size: 1

Availability:

3153-19.05 - 3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 30° Helix Angle, 0.0059 chamfer

3/4 Inch Diameter Endmill, 3/4 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 30° Helix Angle, 0.0059 chamfer

3153-19.05

Brand: Guhring

Unit Size: 1

Availability:

3179-12.70 - 1/2 Inch Diameter Endmill, 1/2 Shank, 6 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 45° Helix Angle, 0.0059 chamfer

1/2 Inch Diameter Endmill, 1/2 Shank, 6 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 45° Helix Angle, 0.0059 chamfer

3179-12.70

Brand: Guhring

Unit Size: 1

Availability:

3173-12.70 - 1/2 Inch Diameter Endmill, 1/2 Shank, 3 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 45° Helix Angle, 0.0059 chamfer

1/2 Inch Diameter Endmill, 1/2 Shank, 3 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 45° Helix Angle, 0.0059 chamfer

3173-12.70

Brand: Guhring

Unit Size: 1

Availability:

3182-12.70 - 1/2 Inch Diameter Endmill, 1/2 Shank, 6 flutes, 1 Length of Cut, Carbide, nano-Si Coated, HA Shank, 3 Overall Length, 55° Helix Angle, 0.0059 chamfer

1/2 Inch Diameter Endmill, 1/2 Shank, 6 flutes, 1 Length of Cut, Carbide, nano-Si Coated, HA Shank, 3 Overall Length, 55° Helix Angle, 0.0059 chamfer

3182-12.70

Brand: Guhring

Unit Size: 1

Availability:

3086-12.70 - 1/2 Inch Diameter Endmill, 1/2 Shank, 3 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.0059 chamfer

1/2 Inch Diameter Endmill, 1/2 Shank, 3 flutes, 5/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 2-1/2 Overall Length, 45° Helix Angle, 0.0059 chamfer

3086-12.70

Brand: Guhring

Unit Size: 1

Availability:

3731-8.00 - 8mm Diameter Endmill, 8mm shank, 4 flutes, 12mm Length of Cut, 21 Reach (mm), Carbide, FIREX Coated, HB Shank, 58mm Overal Length, 35/38° Helix Angle, 0.15 chamfer (mm)

8mm Diameter Endmill, 8mm shank, 4 flutes, 12mm Length of Cut, 21 Reach (mm), Carbide, FIREX Coated, HB Shank, 58mm Overal Length, 35/38° Helix Angle, 0.15 chamfer (mm)

3731-8.00

Brand: Guhring

Unit Size: 1

Availability:

3153-12.70 - 1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.0059 chamfer

1/2 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 30° Helix Angle, 0.0059 chamfer

3153-12.70

Brand: Guhring

Unit Size: 1

Availability:

3741-13.00 - 13mm Diameter Endmill, 13mm shank, 3 flutes, 22mm Length of Cut, Carbide, FIREX Coated, HA Shank, 83mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

13mm Diameter Endmill, 13mm shank, 3 flutes, 22mm Length of Cut, Carbide, FIREX Coated, HA Shank, 83mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

3741-13.00

Brand: Guhring

Unit Size: 1

Availability:

3741-16.00 - 16mm Diameter Endmill, 16mm shank, 3 flutes, 26mm Length of Cut, Carbide, FIREX Coated, HA Shank, 92mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

16mm Diameter Endmill, 16mm shank, 3 flutes, 26mm Length of Cut, Carbide, FIREX Coated, HA Shank, 92mm Overal Length, 45° Helix Angle, 0.15 chamfer (mm)

3741-16.00

Brand: Guhring

Unit Size: 1

Availability:

3731-6.00 - 6mm Diameter Endmill, 6mm shank, 4 flutes, 10mm Length of Cut, 17 Reach (mm), Carbide, FIREX Coated, HB Shank, 54mm Overal Length, 35/38° Helix Angle, 0.15 chamfer (mm)

6mm Diameter Endmill, 6mm shank, 4 flutes, 10mm Length of Cut, 17 Reach (mm), Carbide, FIREX Coated, HB Shank, 54mm Overal Length, 35/38° Helix Angle, 0.15 chamfer (mm)

3731-6.00

Brand: Guhring

Unit Size: 1

Availability:

3150-11.11 - 7/16 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, Bright Finish, HA Shank, 2-3/4 Overall Length, 30° Helix Angle, 0.0059 chamfer

7/16 Inch Diameter Endmill, 1/2 Shank, 4 flutes, 1 Length of Cut, Carbide, Bright Finish, HA Shank, 2-3/4 Overall Length, 30° Helix Angle, 0.0059 chamfer

3150-11.11

Brand: Guhring

Unit Size: 1

Availability:

3115-15.87 - 5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3-1/2 Overall Length, 44/45/46° Helix Angle, 0.0059 chamfer

5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3-1/2 Overall Length, 44/45/46° Helix Angle, 0.0059 chamfer

3115-15.87

Brand: Guhring

Unit Size: 1

Availability:

3181-19.05 - 3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 45° Helix Angle, 0.0059 chamfer

3/4 Inch Diameter Endmill, 3/4 Shank, 8 flutes, 2-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 5 Overall Length, 45° Helix Angle, 0.0059 chamfer

3181-19.05

Brand: Guhring

Unit Size: 1

Availability:

3115-12.70 - 1/2 Inch Diameter Endmill, 1/2 Shank, 6 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 44/45/46° Helix Angle, 0.0059 chamfer

1/2 Inch Diameter Endmill, 1/2 Shank, 6 flutes, 1 Length of Cut, Carbide, FIREX Coated, HA Shank, 3 Overall Length, 44/45/46° Helix Angle, 0.0059 chamfer

3115-12.70

Brand: Guhring

Unit Size: 1

Availability:

3115-19.05 - 3/4 Inch Diameter Endmill, 3/4 Shank, 6 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 44/45/46° Helix Angle, 0.0059 chamfer

3/4 Inch Diameter Endmill, 3/4 Shank, 6 flutes, 1-1/2 Length of Cut, Carbide, FIREX Coated, HA Shank, 4 Overall Length, 44/45/46° Helix Angle, 0.0059 chamfer

3115-19.05

Brand: Guhring

Unit Size: 1

Availability:

3183-15.87 - 5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 1-1/4 Length of Cut, 3 Reach, Carbide, nano-Si Coated, HA Shank, 5 Overall Length, 55° Helix Angle, 0.0059 chamfer

5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 1-1/4 Length of Cut, 3 Reach, Carbide, nano-Si Coated, HA Shank, 5 Overall Length, 55° Helix Angle, 0.0059 chamfer

3183-15.87

Brand: Guhring

Unit Size: 1

Availability:

3183-12.70 - 1/2 Inch Diameter Endmill, 1/2 Shank, 6 flutes, 1 Length of Cut, 2-3/4 Reach, Carbide, nano-Si Coated, HA Shank, 4-1/2 Overall Length, 55° Helix Angle, 0.0059 chamfer

1/2 Inch Diameter Endmill, 1/2 Shank, 6 flutes, 1 Length of Cut, 2-3/4 Reach, Carbide, nano-Si Coated, HA Shank, 4-1/2 Overall Length, 55° Helix Angle, 0.0059 chamfer

3183-12.70

Brand: Guhring

Unit Size: 1

Availability:

6703-16.00 - 16mm Diameter Endmill, 16mm shank, 3 flutes, 32mm Length of Cut, 58 Reach (mm), Carbide, Bright Finish, HB Shank, 108mm Overal Length, 39/40/41° Helix Angle, 0.32 chamfer (mm)

16mm Diameter Endmill, 16mm shank, 3 flutes, 32mm Length of Cut, 58 Reach (mm), Carbide, Bright Finish, HB Shank, 108mm Overal Length, 39/40/41° Helix Angle, 0.32 chamfer (mm)

6703-16.00

Brand: Guhring

Unit Size: 1

Availability:

Showing: 1-50 of 386