5/8 Inch Diameter Endmill, 5/8 Shank, 6 flutes, 1-1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 3-1/2 Overall Length, 44/45/46° Helix Angle, 0.0059 chamfer
The S/F six flute 44°/45°/46° variable helix end mill is suitable for super finishing high speed milling operations as well as semi-roughing with feed widths up to 0.3 x D. Extremely good surface qualities are produced thanks to large helix angles. The material spectrum covers all mild steels, cast iron, non-ferrous metals and high-alloyed materials. FIREX® coated for additional tool life. Coolant fed version is available from stock.
Features Back To Top
- Suitable for semi-roughing (HPC) and HSC-finishing
- Extremely high form accuracy
- Vibration-free operation
- Optimized flute geometry
- High feed rates possible
- Optimal surface quality
- Increased tool life
Tech Specs Back To Top
| Brand | Guhring |
|---|---|
| Chamfer Decimal | 0.0059" |
| Chamfer Metric | 0.15 mm |
| Coating | FIREX |
| Coolant | without |
| Decimal Inch (dia) | 0.6250 |
| Fractional Diameter | 5/8" |
| Helix Angle | 44/45/46° |
| Length of Cut | 1-1/4 |
| Material | Solid Carbide |
| Metric Diameter | 15.88 mm |
| Number of Flutes | 6 |
| Overall Length | 3-1/2 |
| Overall Length (decimal) | 3.5000 |
| Overall Length (mm) | 88.9 |
| Series | 3115 |
| Shank Dia | 5/8 |
| Shank Dia (decimal) | 0.6250 |
| Shank Diameter (mm) | 15.875 |
| Shank Type | HA |
