0.5000 in. (1/2) Shank Diameter x 82 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute Carbide Double Ended Tipped Off Chamfer Mill

TC88053

0.5000 in. (1/2) Shank Diameter x 82 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88143

0.5000 in. (1/2) Shank Diameter x 90 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute Carbide Double Ended Tipped Off Chamfer Mill

TC88071

0.5000 in. (1/2) Shank Diameter x 60 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute Carbide Double Ended Tipped Off Chamfer Mill

TC88035

0.5000 in. (1/2) Shank Diameter x 60 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88125

0.5000 in. (1/2) Shank Diameter x 100 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute Carbide Tipped Off Chamfer Mill

TC87645

0.5000 in. (1/2) Shank Diameter x 100 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87705

0.5000 in. (1/2) Shank Diameter x 120 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute Carbide Tipped Off Chamfer Mill

TC87657

0.5000 in. (1/2) Shank Diameter x 120 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87717

0.5000 in. (1/2) Shank Diameter x 60 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute Carbide Tipped Off Chamfer Mill

TC87609

0.5000 in. (1/2) Shank Diameter x 60 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87669

0.5000 in. (1/2) Shank Diameter x 82 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute Carbide Tipped Off Chamfer Mill

TC87621

0.5000 in. (1/2) Shank Diameter x 82 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87681

0.5000 in. (1/2) Shank Diameter x 90 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute Carbide Tipped Off Chamfer Mill

TC87633

0.5000 in. (1/2) Shank Diameter x 90 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87693