1/8 (.1250) 2-Flutes, Straight, TIALN Coated Solid Dura-Carb SE 3730 Chamfer Mill- 90° Included Angle

36161

1/2 (.5000) 2-Flutes, Straight, TIALN Coated Solid Dura-Carb SE 3730 Chamfer Mill- 90° Included Angle

36093

1/8 in. Diameter x 0.062 in. Length of Cut x 1-1/2 in. Overall Length x 90 Deg. Internal Angle Carbide Chamfer Mill

CM18C2090U

0.5000 in. (1/2) Shank Diameter x 100? Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter Carbide 3 Helical Flute Zplus Coated Chamfer Mill

59827-HELICAL

0.1250 in. (1/8) Shank Diameter x 90? Included Angle x 1.5000 in. (1-1/2) Overall Length X 0.0400 in. Tip Diameter Carbide 5 Helical Flute Aplus Coated Chamfer Mill

83874-HELICAL

0.5000 in. (1/2) Shank Diameter x 90 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87813

0.5000 in. (1/2) Shank Diameter x 90 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute Carbide Tipped Off Chamfer Mill

TC87753

1/2 in. Diameter x 0.210 in. Length of Cut x 3 in. Overall Length x 90 Deg. Internal Angle GMS2 Coated Carbide Chamfer Mill

CMHP12C5090

1/8 (.1250) 4-Flutes, Straight, Solid Dura-Carb SE 3730 Chamfer Mill- 90° Included Angle

36158-FULLERTON

0.5000 in. (1/2) Shank Diameter x 90 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88161

0.5000 in. (1/2) Shank Diameter x 90? Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter Carbide 5 Helical Flute Aplus Coated Chamfer Mill

07029-HELICAL

0.1250 in. (1/8) Shank Diameter x 90? Included Angle x 2.0000 in. (2) Overall Length X 0.0150 in. (1/64) Tip Diameter Carbide 2 Flute Aplus Coated Chamfer Mill

06018

0.5000 in. (1/2) Shank Diameter x 82? Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter Carbide 3 Helical Flute Zplus Coated Chamfer Mill

84609-HELICAL

1/2 in. Diameter x 0.433 in. Length of Cut x 3 in. Overall Length x 60 Deg. Internal Angle GMX-35 Coated Carbide Chamfer Mill

CM12C4060

1/2 in. Diameter x 0.250 in. Length of Cut x 3 in. Overall Length x 90 Deg. Internal Angle GMX-35 Coated Carbide Chamfer Mill

CM12C4090