0.2500 in. (1/4) Shank Diameter x 90 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0440 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87807

0.1250 in. (1/8) Shank Diameter x 100 Deg. Included Angle x 2.0000 in. (2) Overall Length X 0.0200 in. Tip Diameter 2 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC87984

0.1250 in. (1/8) Shank Diameter x 120 Deg. Included Angle x 2.0000 in. (2) Overall Length X 0.0200 in. Tip Diameter 2 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88002

0.2500 in. (1/4) Shank Diameter x 60 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0440 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87783

0.2500 in. (1/4) Shank Diameter x 82 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0440 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87795

0.1250 in. (1/8) Shank Diameter x 60 Deg. Included Angle x 2.0000 in. (2) Overall Length X 0.0200 in. Tip Diameter 2 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC87930

0.1250 in. (1/8) Shank Diameter x 82 Deg. Included Angle x 2.0000 in. (2) Overall Length X 0.0200 in. Tip Diameter 2 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC87948

0.1250 in. (1/8) Shank Diameter x 90 Deg. Included Angle x 2.0000 in. (2) Overall Length X 0.0200 in. Tip Diameter 2 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC87966

0.1250 in. (1/8) Shank Diameter x 100 Deg. Included Angle x 2.0000 in. (2) Overall Length X 0.0200 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88164

0.1250 in. (1/8) Shank Diameter x 120 Deg. Included Angle x 2.0000 in. (2) Overall Length X 0.0200 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88182

0.1250 in. (1/8) Shank Diameter x 60 Deg. Included Angle x 2.0000 in. (2) Overall Length X 0.0200 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88110

0.1250 in. (1/8) Shank Diameter x 82 Deg. Included Angle x 2.0000 in. (2) Overall Length X 0.0200 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88128

0.1250 in. (1/8) Shank Diameter x 90 Deg. Included Angle x 2.0000 in. (2) Overall Length X 0.0200 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88146

0.1250 in. (1/8) Shank Diameter x 100 Deg. Included Angle x 1.5000 in. (1-1/2) Overall Length X 0.0200 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87696

0.1250 in. (1/8) Shank Diameter x 120 Deg. Included Angle x 1.5000 in. (1-1/2) Overall Length X 0.0200 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87708