1/8 (.1250) 2-Flutes, Straight, TIALN Coated Solid Dura-Carb SE 3730 Chamfer Mill- 90° Included Angle

36161

3/16 (.1875) 2-Flutes, Straight, TIALN Coated Solid Dura-Carb SE 3730 Chamfer Mill- 90° Included Angle

36174-FULLERTON

3/8 (.3750) 2-Flutes, Straight, TIALN Coated Solid Dura-Carb SE 3730 Chamfer Mill- 90° Included Angle

36091

1/4 (.2500) 4-Flutes, Straight, TIALN Coated Solid Dura-Carb SE 3730 Chamfer Mill- 90° Included Angle

36088-FULLERTON

1/2 (.5000) 2-Flutes, Straight, TIALN Coated Solid Dura-Carb SE 3730 Chamfer Mill- 90° Included Angle

36093

0.3750 in. (3/8) Shank Diameter x 45 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

72545-C3

0.1250 in. (1/8) Shank Diameter x 45 Deg. Per Side 4 Helical Flute AlTiN Coated Carbide Pointed Chamfer Cutter

859708-C3

0.2500 in. (1/4) Shank Diameter x 45 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

47645-C3

0.1250 in. (1/8) Shank Diameter x 45 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

18745-C3

0.1250 in. (1/8) Shank Diameter x 45 Deg. per side 4 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

744445-C3

0.0930 in. (3/32) Neck Diameter x 1.4000 in. Reach x 45 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

902845-C3

0.1350 in. Max Opening Width x 0.2500 in. (1/4) Shank Diameter x 90 Deg. Included 4 Flute AlTiN Coated Carbide Plate Chamfer

971108-C3

0.2500 in. (1/4) Shank Diameter x 30 Deg. Per Side 2 Flute AlTiN Coated Carbide Pointed Chamfer Cutter

47630-C3

0.1650 in. Head Diameter x 0.0290 in. Loc x 0.5000 in. (1/2) Neck Length x 45 Deg. Per Side 5 Flute AlTiN Coated Carbide Back Chamfer Cutter

938230-C3

0.5000 in. (1/2) Shank Diameter x 90 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87813