0.5000 in. (1/2) Shank Diameter x 60 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88125

0.5000 in. (1/2) Shank Diameter x 82 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88143

0.5000 in. (1/2) Shank Diameter x 100 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87705

0.5000 in. (1/2) Shank Diameter x 100 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88179

0.5000 in. (1/2) Shank Diameter x 120 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88197

0.5000 in. (1/2) Shank Diameter x 120 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87717

0.5000 in. (1/2) Shank Diameter x 60 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87669

0.5000 in. (1/2) Shank Diameter x 82 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87681

0.5000 in. (1/2) Shank Diameter x 90 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 2 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87693

0.5000 in. (1/2) Shank Diameter x 100 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87825

0.5000 in. (1/2) Shank Diameter x 120 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87837

0.5000 in. (1/2) Shank Diameter x 60 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87789

0.5000 in. (1/2) Shank Diameter x 82 Deg. Included Angle x 3.0000 in. (3) Overall Length X 0.0800 in. Tip Diameter 4 Flute AlTiN Coated Carbide Tipped Off Chamfer Mill

TC87801

0.2500 in. (1/4) Shank Diameter x 100 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0440 in. Tip Diameter 2 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC87990

0.2500 in. (1/4) Shank Diameter x 120 Deg. Included Angle x 2.5000 in. (2-1/2) Overall Length X 0.0440 in. Tip Diameter 2 Flute AlTiN Coated Carbide Double Ended Tipped Off Chamfer Mill

TC88008