92514 - 16.00mm (.6299) 4-Flutes, 30° Helix TIALN Coated Solid Dura-Carb II 3995 Fine Pitch Hogger

16.00mm (.6299) 4-Flutes, 30° Helix TIALN Coated Solid Dura-Carb II 3995 Fine Pitch Hogger

Fullerton's solid carbide 3995 Series sinusoidal Hogger is designed as a rougher for high volume material removal. This tool excels in Titanium, Inconel, Waspaloy and other difficult-to-machine aerospace alloys.
  • Item Code: 92514
  • Availability:
  • Mfg Part #: 92514
  • Brand: Fullerton

Unit Size: 1

Features Tech Specs Reviews

Features Back To Top

    • Corner Radius
    • Flute Count Varies by Diameter
    • 30� Helix
    • Sinusoidal Geometry (Corn Cob Cutters)
    • Form Relief
    • Fine Pitch
    • Single End
    • Right Hand Spiral
    • Right Hand Cut
    • Center Cutting
    • Standard TiAlN Coating
    • Weldon Flat Standard
    • Metric and Inch Based Tools
    • Dura Carb II (Advanced Micrograin)
    • Shank Diameter Tolerance: h6
    • Cutter Diameter Tolerance: +.000�� -.003�� / +0.00 -0.07mm

Tech Specs Back To Top

Brand Fullerton
Coating/Finish TiAlN
Coolant Through No
Decimal Diameter 0.6299"
Direction of Cut RH
End Type SE
End Type Character Designation R
Flute Length (Decimal Inch) 1.1811
Flute Length (mm) 30.00
Flute Spiral Direction RH
Length Standard
Length Designator SD
Material Solid Carbide
Metric Diameter 16.00 mm
Number of Flutes 4
Overall Length (Decimal Inch) 3.5039
Overall Length (mm) 89.00
Point End Type Corner Radius
Radius (Decimal Inch) 0.0787
Radius (mm) 2.00
Series 3995
Shank Diameter (Decimal Inch) 0.6299
Shank Diameter (mm) 16.00
Weldon Flat Yes

Related Items Back To Top

NoImage

71012

1 Inch 6-Flute Single End Roughing Endmill

TC29524

0.3750 in. (3/8) Cutter Diameter x 0.8750 in. (7/8) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

TC29516

0.2500 in. (1/4) Cutter Diameter x 0.7500 in. (3/4) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

TC29532

0.5000 in. (1/2) Cutter Diameter x 1.2500 in. (1-1/4) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

TC29540

0.6250 in. (5/8) Cutter Diameter x 1.6250 in. (1-5/8) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

I4S0250T050S TIALN

1/4 in. x 1/4 in. x 1/2 in. x 2 in. Solid Carbide TiALN 4 Flute Sharp Edge Cylindrical Shank General Purpose End Mill

I4S0125T050R TIALN

1/8 in. x 1/8 in. x 1/2 in. x 1-1/2 in. Solid Carbide TiALN 4 Flute Sharp Edge Cylindrical Shank General Purpose End Mill

TC29332

0.5000 in. (1/2) Cutter Diameter x 0.6250 in. (5/8) Length of Cut 4 Flute AlTiN Coated Carbide Fine Pitch Square Rougher Endmill

82700-HELICAL

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.0300 in. Radius x 0.3750 in. (3/8) Length of Cut x 4.0000 in. (4) Overall Length x 1.5000 in. (1-1/2) Reach Carbide 5 Flute Tplus Coated Coolant Through High Feed Endmill

82716

12.00 mm Cutter Diameter x 12.00 mm Shank Diameter x 0.960 mm Radius x 12.00 mm Length of Cut x 125.00 mm Overall Length x 72.00 mm Reach Carbide 5 Flute Tplus Coated Coolant Through High Feed Endmill

GMHX12RS4015

1/2 in. Diameter x 5/8 in. Length of Cut x 2-1/2 in. Overall Length x 0.015 in. Radius Carbide Stub 4 Flutes GMS2 Coated Rougher/Finisher Endmill

GMHX12R4060

1/2 in. Diameter x 1-1/4 in. Length of Cut x 3 in. Overall Length x 0.06 in. Radius Carbide 4 Flutes GMS2 Coated Rougher/Finisher Endmill

83737

0.5000 in. (1/2) Cutter Diameter x 0.5000 in. (1/2) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 7.0000 in. (7) Overall Length x 4.0000 in. (4) Reach Carbide 5 Flute Tplus Coated Coolant Through High Feed Endmill

82680

3.00 mm Cutter Diameter x 3.00 mm Shank Diameter x 0.24 mm Radius x 3.00 mm Length of Cut x 50.00 mm Overall Length x 18.00 mm Reach Carbide 4 Flute Tplus Coated High Feed Endmill

82682

4.00 mm Cutter Diameter x 4.00 mm Shank Diameter x 0.320 mm Radius x 4.00 mm Length of Cut x 63.00 mm Overall Length x 16.00 mm Reach Carbide 4 Flute Tplus Coated High Feed Endmill

83730

0.1875 in. (3/16) Cutter Diameter x 0.2500 in. (1/4) Shank Diameter x 0.1875 in. (3/16) Length of Cut x 2.5000 in. (2-1/2) Overall Length x 1.1250 in. (1-1/8) Reach Carbide 4 Flute Tplus Coated High Feed Endmill

84492

0.3750 in. (3/8) Cutter Diameter x 0.3750 in. (3/8) Shank Diameter x 0.5000 in. (1/2) Length of Cut x 2.0000 in. (2) Overall Length Carbide 5 Flute Tplus Coated Combination Feed & HEM Endmill
1

I4S0125T050R UNCOATED

1/8 in. x 1/8 in. x 1/2 in. x 1-1/2 in. Solid Carbide Uncoated 4 Flute Sharp Edge Cylindrical Shank General Purpose End Mill