8mm Diameter Endmill, 8mm shank, 3 flutes, 19mm Length of Cut, 38 Reach (mm), Carbide, HB Shank, 75mm Overal Length, 39/40/41° Helix Angle, 0.16 chamfer (mm)
Aluminum is the primary material for the RF100 A variable helix end mill. The 40°/42° variable helix angles and rake face angles are optimally suited for long chipping materials as well as non-ferrous materials. Available bright finished.
Features Back To Top
- Suitable for roughing and finishing
- Up to 60% higher feed rates
- Up to 4-times longer tool life
- Vibration-free operation
- Improved workpiece surface quality
Tech Specs Back To Top
Brand | Guhring |
---|---|
Chamfer Decimal | 0.0063" |
Chamfer Metric | 0.16 mm |
Decimal Inch (dia) | 0.3150 |
Helix Angle | 39/40/41° |
Length of Cut (decimal) | 0.4720 |
Length of Cut (mm) | 19 |
Material | Solid Carbide |
Metric Diameter | 8.00 mm |
Number of Flutes | 3 |
Overall Length (decimal) | 2.9528 |
Overall Length (mm) | 75 |
Reach (decimal) | 1.4960 |
Reach (mm) | 38 |
Series | 6703 |
Shank Dia (decimal) | 0.3150 |
Shank Diameter (mm) | 8 |
Shank Type | HB |