20mm Diameter Endmill, 20mm shank, 3 flutes, 38mm Length of Cut, 74 Reach (mm), Carbide, HB Shank, 126mm Overal Length, 39/40/41° Helix Angle, 0.4 chamfer (mm)
Aluminum is the primary material for the RF100 A variable helix end mill. The 40°/42° variable helix angles and rake face angles are optimally suited for long chipping materials as well as non-ferrous materials. Available bright finished.
Features Back To Top
- Suitable for roughing and finishing
- Up to 60% higher feed rates
- Up to 4-times longer tool life
- Vibration-free operation
- Improved workpiece surface quality
Tech Specs Back To Top
| Brand | Guhring |
|---|---|
| Chamfer Decimal | 0.0157" |
| Chamfer Metric | 0.40 mm |
| Decimal Inch (dia) | 0.7874 |
| Helix Angle | 39/40/41° |
| Length of Cut (decimal) | 1.024 |
| Length of Cut (mm) | 38 |
| Material | Solid Carbide |
| Metric Diameter | 20.00 mm |
| Number of Flutes | 3 |
| Overall Length (decimal) | 4.9606 |
| Overall Length (mm) | 126 |
| Reach (decimal) | 2.9130 |
| Reach (mm) | 74 |
| Series | 6703 |
| Shank Dia (decimal) | 0.7874 |
| Shank Diameter (mm) | 20 |
| Shank Type | HB |
