7/16 Inch Diameter Endmill, 7/16 Shank, 3 flutes, 1 Length of Cut, Carbide, HA/HB Shank, 2-3/4 Overall Length, 39/40/41° Helix Angle, 0.0087 chamfer
Aluminum is the primary material for the RF100 A variable helix end mill. The 40°/42° variable helix angles and rake face angles are optimally suited for long chipping materials as well as non-ferrous materials. Available bright finished.
Features Back To Top
- Suitable for roughing and finishing
- Up to 60% higher feed rates
- Up to 4-times longer tool life
- Vibration-free operation
- Improved workpiece surface quality
Tech Specs Back To Top
| Brand | Guhring |
|---|---|
| Chamfer Decimal | 0.0087" |
| Chamfer Metric | 0.22 mm |
| Decimal Inch (dia) | 0.4375 |
| Fractional Diameter | 7/16" |
| Helix Angle | 39/40/41° |
| Length of Cut | 1 |
| Material | Solid Carbide |
| Metric Diameter | 11.11 mm |
| Number of Flutes | 3 |
| Overall Length | 2-3/4 |
| Overall Length (decimal) | 2.748 |
| Overall Length (mm) | 69.8 |
| Series | 4265 |
| Shank Dia | 7/16 |
| Shank Dia (decimal) | 0.4375 |
| Shank Diameter (mm) | 11.113 |
| Shank Type | HA/HB |
