41463 - 1/4 Inch Solid Carbide Alumastar Coated 3-Flute HSAL Square End Series 143M Endmill

1/4 Inch Solid Carbide Alumastar Coated 3-Flute HSAL Square End Series 143M Endmill

Series 143M- 3 Flute

HSAL End Mill - Square End

ALUMASTAR Coating

Recommended for Aluminum

  • Item Code: 41463
  • Availability:
  • Mfg Part #: GT41463
  • Brand: Garr

Unit Size: 1

Features Tech Specs Reviews

Features Back To Top

    • Solid submicron grain carbide end mill - center cutting
    • Specific coating engineered to repel aluminum
    • Engineered to run at 750-2500 SFM (225-750 M/Min.)
    • For high speed machining of aluminum
    • High velocity - high metal removal rate (for spindles 10,000 RPM and above)
    • Need to use properly balanced holders
    • Holds perpendicularity

Tech Specs Back To Top

Brand Garr
Coating/Finish Alumastar
End Cut Type Square End
Flute Diameter 0.25
Flute Length 3/4"
Fractional Diameter 1/4"
Material Solid Carbide
Number of Flutes 3
Overall Length 2-1/2"
Shank Diameter 1/4"
Type Center cutting

Related Items Back To Top

30607

1/16 (.0625) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square

30627

3/8 (.3750) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square

30619-F

1/4 (.2500) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square

30615

3/16 (.1875) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square

TC10624

0.3750 in. (3/8) Cutter Diameter x 0.6250 in. (5/8) Length of Cut 4 Flute Carbide Square Endmill

32828

1/8 (.1250) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square/ Stub

30635

1/2 (.5000) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square

17812510A

1/8 Inch Diameter, 3/8 Inch LOC, 1-1/2 Inch OAL Carbide ALtima® Coated TuffCut® XR 5-Flute End Mill

65025-IMCO

1/4 x 1/4 x 3/8 x 2 Carbide 40 Deg. Helix Angle 5 Flute Square End Endmill

16309370A

3/32 Solid Carbide ALTima Coated 4-Flute 1-1/2 OAL TuffCut General Purpose Endmill

30606

3/64 (.0469) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square

32824

1/16 (.0625) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square/ Stub

32825

5/64 (.0781) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square/ Stub

32830

3/16 (.1875) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square/ Stub

32833

3/8 (.3750) TIALN Coated Dura-Carb Series 3200 4-Flute GP SE End Mill- Square/ Stub

17837500A

3/8 Inch Diameter, 1/2 Inch LOC, 2 Inch OAL Carbide ALtima® Coated TuffCut® XR 5-Flute End Mill

I4S0250T075R

1/4 x 1/4 x 3/4 x 2-1/2 Inch Solid Carbide 4 Flute Endmill

38166-FULLERTON

1/2 (.5000) 5-Flutes, 45° Helix, Square TIALN Coated Solid Dura-Carb 3845 Falcon Finisher End Mill