1 Inch (1.0000) 5-Flutes, 30° Helix TIALN Coated Solid Dura-Carb II 3995 Fine Pitch Hogger
Fullerton's solid carbide 3995 Series sinusoidal Hogger is designed as a rougher for high volume material removal. This tool excels in Titanium, Inconel, Waspaloy and other difficult-to-machine aerospace alloys.
Features Back To Top
- Corner Radius
- Flute Count Varies by Diameter
- 30� Helix
- Sinusoidal Geometry (Corn Cob Cutters)
- Form Relief
- Fine Pitch
- Single End
- Right Hand Spiral
- Right Hand Cut
- Center Cutting
- Standard TiAlN Coating
- Weldon Flat Standard
- Metric and Inch Based Tools
- Dura Carb II (Advanced Micrograin)
- Shank Diameter Tolerance: h6
- Cutter Diameter Tolerance: +.000�� -.003�� / +0.00 -0.07mm
Tech Specs Back To Top
Brand | Fullerton |
---|---|
Coating/Finish | TiAlN |
Coolant Through | No |
Decimal Diameter | 1.0000" |
Direction of Cut | RH |
End Type | SE |
End Type Character Designation | R |
Flute Length (Decimal Inch) | 1.5000 |
Flute Length (Inch) | 1-1/2 |
Flute Length (mm) | 38.10 |
Flute Spiral Direction | RH |
Fractional Diameter | 1" |
Length | Standard |
Length Designator | SD |
Material | Solid Carbide |
Metric Diameter | 25.40 mm |
Number of Flutes | 5 |
Overall Length (Decimal Inch) | 4.0000 |
Overall Length (Inch) | 4 |
Overall Length (mm) | 101.60 |
Point End Type | Corner Radius |
Radius (Decimal Inch) | 0.1250 |
Radius (mm) | 3.18 |
Series | 3995 |
Shank Diameter (Decimal Inch) | 1.0000 |
Shank Diameter (Inch) | 1 |
Shank Diameter (mm) | 25.40 |
Weldon Flat | Yes |