3/8 (.3750) 3-Flutes, 30° Helix TIALN Coated Solid Dura-Carb II 3995 Fine Pitch Hogger
Fullerton's solid carbide 3995 Series sinusoidal Hogger is designed as a rougher for high volume material removal. This tool excels in Titanium, Inconel, Waspaloy and other difficult-to-machine aerospace alloys.
Features Back To Top
- Corner Radius
- Flute Count Varies by Diameter
- 30� Helix
- Sinusoidal Geometry (Corn Cob Cutters)
- Form Relief
- Fine Pitch
- Single End
- Right Hand Spiral
- Right Hand Cut
- Center Cutting
- Standard TiAlN Coating
- Weldon Flat Standard
- Metric and Inch Based Tools
- Dura Carb II (Advanced Micrograin)
- Shank Diameter Tolerance: h6
- Cutter Diameter Tolerance: +.000�� -.003�� / +0.00 -0.07mm
Tech Specs Back To Top
Brand | Fullerton |
---|---|
Coating/Finish | TiAlN |
Coolant Through | No |
Decimal Diameter | 0.3750" |
Direction of Cut | RH |
End Type | SE |
End Type Character Designation | R |
Flute Length (Decimal Inch) | 1.0000 |
Flute Length (Inch) | 1 |
Flute Length (mm) | 25.40 |
Flute Spiral Direction | RH |
Fractional Diameter | 3/8" |
Length | Standard |
Length Designator | SD |
Material | Solid Carbide |
Metric Diameter | 9.53 mm |
Number of Flutes | 3 |
Overall Length (Decimal Inch) | 2.5000 |
Overall Length (Inch) | 2-1/2 |
Overall Length (mm) | 63.50 |
Point End Type | Corner Radius |
Radius (Decimal Inch) | 0.0470 |
Radius (mm) | 1.19 |
Series | 3995 |
Shank Diameter (Decimal Inch) | 0.3750 |
Shank Diameter (Inch) | 3/8 |
Shank Diameter (mm) | 9.53 |
Weldon Flat | Yes |