1/8 Inch Diameter Endmill, 1/8 Shank, 2 flutes, 7/16 Length of Cut, Super A Coated, HA Shank, 1-1/2 Overall Length, 45° Helix Angle, 0.001 chamfer
Alumi-tech carbide end mills are designed specifically for milling aluminum and aluminum alloys. Suitable for slot and roughing applications, these tools are available in two and three flute designs, solid and coolant fed. Bright finished and Super-A™ coated standard product is available from stock.
Features Back To Top
- Radius geometry with continuous helix-radius-correction
- Reduced neck ground for collision reduction
Tech Specs Back To Top
| Brand | Guhring |
|---|---|
| Chamfer Decimal | 0.0010" |
| Coating | Super A |
| Decimal Inch (dia) | 0.1250 |
| Fractional Diameter | 1/8" |
| Helix Angle | 45° |
| Length of Cut | 7/16 |
| Metric Diameter | 3.17 mm |
| Number of Flutes | 2 |
| Overall Length | 1-1/2 |
| Overall Length (decimal) | 1.5 |
| Overall Length (mm) | 38.1 |
| Series | 3874 |
| Shank Dia | 1/8 |
| Shank Dia (decimal) | 0.1250 |
| Shank Diameter (mm) | 3.18 |
| Shank Type | HA |
