3/4 (.7500) 3-Flutes FC5 Coated Solid Dura-Carb AlumaMill G3 Vicor HP Chipbreaker End Mill- .030CR
The 3805 AlumaMill G3 Vicor has an advanced flute shape and relief form to produce excellent surface finishes and reduced tool pressure. The added chip breakers* provide chip control while the unique wiper geometry produces excellent floor finishes. The sinuous end gash of the G3 is ideal for agressive plunging and ramping speeds. This tool is stocked with an FC5 coating. Special variations are available uncoated in 2 weeks.
*Any 3833 AlumaMill G3 with a diameter of .25? and over can be made into a 3805 AlumaMill G3 Vicor using our 48 hour chip breaker service.
*Any 3833 AlumaMill G3 with a diameter of .25? and over can be made into a 3805 AlumaMill G3 Vicor using our 48 hour chip breaker service.
Features Back To Top
- Advanced Performance
- Radius End
- 3 Flutes
- 37.5� High Helix
- Chip Breakers
- Right Hand Spiral
- Right Hand Cut
- Standard FC-5 Coating
- Inch Based Tools
- Center Cutting
- Dura Carb (Micrograin)
- Shank Diameter: h6
- Cutter Diameter Tolerance: +.0000�� -. 0005�� / +0.000 -0.013mm
Tech Specs Back To Top
Brand | Fullerton |
---|---|
Coating | FC5 |
Coolant Through | No |
Decimal Cutting Diameter | 0.7500" |
Direction of Cut | RH |
End Type | SE |
End Type Character Designation | R |
Flute Length (Decimal Inch) | 1.7500 |
Flute Length (Inch) | 1-3/4 |
Flute Length (mm) | 44.45 |
Flute Spiral Direction | RH |
Fractional Cutting Diameter | 3/4" |
Length | Standard |
Length Designator | SD |
Metric Cutting Diameter | 19.05 mm |
Metric/Inch | Inch |
Number of Flutes | 3 |
Overall Length (Decimal Inch) | 4.0000 |
Overall Length (Inch) | 4 |
Overall Length (mm) | 101.60 |
Point End Type | Corner Radius |
Radius Decimal | 0.0300" |
Radius Metric | 0.76 mm |
Series | 3805 |
Shank Diameter (Decimal Inch) | 0.7500 |
Shank Diameter (Inch) | 3/4 |
Shank Diameter (mm) | 19.05 |
Weldon Flat | No |