12mm Diameter Endmill, 12mm shank, 4 flutes, 16mm Length of Cut, 46 Reach (mm), Carbide, nano-A Coated, HA Shank, 93mm Overal Length, 36/38° Helix Angle, 0.5 chamfer (mm)
The RF100 VA/NF rougher incorporates the same 36°/38° variable helix design of the RF100 VA with the addition of a roughing profile that requires less power consumption and cutting pressure under difficult machining conditions.
Features Back To Top
- Decreased cutting pressure and power consumption
- Vibration-free operation
- Increased feed rates possible
- Increased surface qualities (R? = 2-3 µm)
- Improved tool life
Tech Specs Back To Top
Brand | Guhring |
---|---|
Chamfer Decimal | 0.0197" |
Chamfer Metric | 0.50 mm |
Coating | Nano-A |
Decimal Inch (dia) | 0.4724 |
Helix Angle | 36/38° |
Length of Cut (decimal) | 0.63 |
Length of Cut (mm) | 16 |
Material | Solid Carbide |
Metric Diameter | 12.00 mm |
Number of Flutes | 4 |
Overall Length (decimal) | 3.6614 |
Overall Length (mm) | 93 |
Reach (decimal) | 1.8110 |
Reach (mm) | 46 |
Series | 3733 |
Shank Dia (decimal) | 0.4724 |
Shank Diameter (mm) | 12 |
Shank Type | HA |