25mm Diameter Endmill, 25mm shank, 6 flutes, 45mm Length of Cut, Carbide, FIREX Coated, HA Shank, 121mm Overal Length, 44/45/46° Helix Angle, 0.2 chamfer (mm)
The S/F six flute 44°/45°/46° variable helix end mill is suitable for super finishing high speed milling operations as well as semi-roughing with feed widths up to 0.3 x D. Extremely good surface qualities are produced thanks to large helix angles. The material spectrum covers all mild steels, cast iron, non-ferrous metals and high-alloyed materials. FIREX® coated for additional tool life. Coolant fed version is available from stock.
Features Back To Top
- Suitable for semi-roughing (HPC) and HSC-finishing
- Extremely high form accuracy
- Vibration-free operation
- Optimized flute geometry
- High feed rates possible
- Optimal surface quality
- Increased tool life
Tech Specs Back To Top
| Brand | Guhring |
|---|---|
| Chamfer Decimal | 0.0079" |
| Chamfer Metric | 0.20 mm |
| Coating | FIREX |
| Decimal Inch (dia) | 0.9843 |
| Helix Angle | 44/45/46° |
| Length of Cut (decimal) | 1.772 |
| Length of Cut (mm) | 45 |
| Material | Solid Carbide |
| Metric Diameter | 25.00 mm |
| Number of Flutes | 6 |
| Overall Length (decimal) | 4.7638 |
| Overall Length (mm) | 121 |
| Series | 3631 |
| Shank Dia (decimal) | 0.9843 |
| Shank Diameter (mm) | 25 |
| Shank Type | HA |
