3/4 (.7500) 4-Flutes FC20 Coated Solid Dura-Carb Fury Vicor 3505 Chipbreaker End Mill- .030CR/Standard
Fullerton Tool's high performance, solid carbide 3505 series end mill features chip breakers* to provide chip control for specific demanding applications. With the Fury Vicor, smaller chips will easily be flushed away from the cut zone resulting in less chances of chip re-cutting. This unique end mill provides less tool pressure and stable chip control at high speeds resulting in an excellent surface finish.
*Any 3500 Fury End Mill can be converted to a 3505 Fury Vicor using our 48 Hour JIT Chip Breaker Service.
*Any 3500 Fury End Mill can be converted to a 3505 Fury Vicor using our 48 Hour JIT Chip Breaker Service.
Features Back To Top
- Advanced Performance
- 4 Flute
- Corner Radius
- Variable Helix
- Variable Index
- Right Hand Sprial
- Center Cutting
- Stub, Standard, Extra Long Length
- Standard FC-20 Coating
- Inch and Metric Based Tools
- Dura Carb (Micrograin)
Tech Specs Back To Top
Brand | Fullerton |
---|---|
Coating | FC20 |
Coolant Through | No |
Decimal Cutting Diameter | 0.7500" |
Direction of Cut | RH |
End Type | SE |
End Type Character Designation | R |
Flute Length (Decimal Inch) | 1.5000 |
Flute Length (Inch) | 1-1/2 |
Flute Length (mm) | 38.10 |
Flute Spiral Direction | RH |
Fractional Cutting Diameter | 3/4" |
Length | Standard |
Length Designator | SD |
Metric Cutting Diameter | 19.05 mm |
Metric/Inch | Inch |
Number of Flutes | 4 |
Overall Length (Decimal Inch) | 4.0000 |
Overall Length (Inch) | 4 |
Overall Length (mm) | 101.60 |
Point End Type | Corner Radius |
Radius Decimal | 0.0300" |
Radius Metric | 0.76 mm |
Series | 3505 |
Shank Diameter (Decimal Inch) | 0.7500 |
Shank Diameter (Inch) | 3/4 |
Shank Diameter (mm) | 19.05 |
Weldon Flat | No |