5/8 (.6250) 4-Flutes FC20 Coated Solid Dura-Carb Fury Vicor 3505 Chipbreaker End Mill- .030CR/Standard
Fullerton Tool's high performance, solid carbide 3505 series end mill features chip breakers* to provide chip control for specific demanding applications. With the Fury Vicor, smaller chips will easily be flushed away from the cut zone resulting in less chances of chip re-cutting. This unique end mill provides less tool pressure and stable chip control at high speeds resulting in an excellent surface finish.
*Any 3500 Fury End Mill can be converted to a 3505 Fury Vicor using our 48 Hour JIT Chip Breaker Service.
*Any 3500 Fury End Mill can be converted to a 3505 Fury Vicor using our 48 Hour JIT Chip Breaker Service.
Features Back To Top
- Advanced Performance
- 4 Flute
- Corner Radius
- Variable Helix
- Variable Index
- Right Hand Sprial
- Center Cutting
- Stub, Standard, Extra Long Length
- Standard FC-20 Coating
- Inch and Metric Based Tools
- Dura Carb (Micrograin)
Tech Specs Back To Top
| Brand | Fullerton |
|---|---|
| Coating | FC20 |
| Coolant Through | No |
| Decimal Cutting Diameter | 0.6250" |
| Direction of Cut | RH |
| End Type | SE |
| End Type Character Designation | R |
| Flute Length (Decimal Inch) | 1.2500 |
| Flute Length (Inch) | 1-1/4 |
| Flute Length (mm) | 31.75 |
| Flute Spiral Direction | RH |
| Fractional Cutting Diameter | 5/8" |
| Length | Standard |
| Length Designator | SD |
| Metric Cutting Diameter | 15.88 mm |
| Metric/Inch | Inch |
| Number of Flutes | 4 |
| Overall Length (Decimal Inch) | 3.5000 |
| Overall Length (Inch) | 3-1/2 |
| Overall Length (mm) | 88.90 |
| Point End Type | Corner Radius |
| Radius Decimal | 0.0300" |
| Radius Metric | 0.76 mm |
| Series | 3505 |
| Shank Diameter (Decimal Inch) | 0.6250 |
| Shank Diameter (Inch) | 5/8 |
| Shank Diameter (mm) | 15.88 |
| Weldon Flat | No |
