20mm Diameter Endmill, 20mm shank, 4 flutes, 38mm Length of Cut, Carbide, HB Shank, 104mm Overal Length, 40/42° Helix Angle, 0.45 chamfer (mm)
Aluminum is the primary material for the RF100 A variable helix end mill. The 40°/42° variable helix angles and rake face angles are optimally suited for long chipping materials as well as non-ferrous materials. Available bright finished.
Features Back To Top
- Suitable for roughing and finishing
- Up to 60% higher feed rates
- Up to 4-times longer tool life
- Vibration-free operation
- Improved workpiece surface quality
Tech Specs Back To Top
| Brand | Guhring |
|---|---|
| Chamfer Decimal | 0.0177" |
| Chamfer Metric | 0.45 mm |
| Decimal Inch (dia) | 0.7874 |
| Helix Angle | 40/42° |
| Length of Cut (decimal) | 1.496 |
| Length of Cut (mm) | 38 |
| Material | Solid Carbide |
| Metric Diameter | 20.00 mm |
| Number of Flutes | 4 |
| Overall Length (decimal) | 4.0945 |
| Overall Length (mm) | 104 |
| Series | 3319 |
| Shank Dia (decimal) | 0.7874 |
| Shank Diameter (mm) | 20 |
| Shank Type | HB |
