5mm Diameter Endmill, 6mm shank, 4 flutes, 13mm Length of Cut, 18 Reach (mm), Carbide, HA Shank, 57mm Overal Length, 40/42° Helix Angle, 0.1 chamfer (mm)
Aluminum is the primary material for the RF100 A variable helix end mill. The 40°/42° variable helix angles and rake face angles are optimally suited for long chipping materials as well as non-ferrous materials. Available bright finished.
Features Back To Top
- Suitable for roughing and finishing
- Up to 60% higher feed rates
- Up to 4-times longer tool life
- Vibration-free operation
- Improved workpiece surface quality
Tech Specs Back To Top
Brand | Guhring |
---|---|
Chamfer Decimal | 0.0039" |
Chamfer Metric | 0.10 mm |
Decimal Inch (dia) | 0.1969 |
Helix Angle | 40/42° |
Length of Cut (decimal) | 0.512 |
Length of Cut (mm) | 13 |
Material | Solid Carbide |
Metric Diameter | 5.00 mm |
Number of Flutes | 4 |
Overall Length (decimal) | 2.2441 |
Overall Length (mm) | 57 |
Reach (decimal) | 0.7090 |
Reach (mm) | 18 |
Series | 3202 |
Shank Dia (decimal) | 0.2362 |
Shank Diameter (mm) | 6 |
Shank Type | HA |