1/8 Inch Diameter Endmill, 1/8 Shank, 3 flutes, 1/4 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 45° Helix Angle, 0.002 chamfer
The Aero-Tech three-flute design has been developed for cost efficient machining of general steels, stainless steel, high alloyed steels as well as titanium and nickel alloys. All Aero-Tech end mills have micro corner protection for extended tool life. Available in FIREX® coated or bright finished as stocked standards.
Features Back To Top
- Reduced wear
- High feed rates available
- Optimal chip evacuation
- Can be applied for roughing or finishing
Tech Specs Back To Top
| Brand | Guhring |
|---|---|
| Chamfer Decimal | 0.0020" |
| Chamfer Metric | 0.05 mm |
| Coating | FIREX |
| Decimal Inch (dia) | 0.1250 |
| Fractional Diameter | 1/8" |
| Helix Angle | 45° |
| Length of Cut | 1/4 |
| Material | Solid Carbide |
| Metric Diameter | 3.18 mm |
| Number of Flutes | 3 |
| Overall Length | 1-1/2 |
| Overall Length (decimal) | 1.5 |
| Overall Length (mm) | 38.1 |
| Series | 3086 |
| Shank Dia | 1/8 |
| Shank Dia (decimal) | 0.1250 |
| Shank Diameter (mm) | 3.175 |
| Shank Type | HA |
