1/16 Inch Diameter Endmill, 1/8 Shank, 3 flutes, 1/8 Length of Cut, Carbide, FIREX Coated, HA Shank, 1-1/2 Overall Length, 45° Helix Angle, 0.0012 chamfer
The Aero-Tech three-flute design has been developed for cost efficient machining of general steels, stainless steel, high alloyed steels as well as titanium and nickel alloys. All Aero-Tech end mills have micro corner protection for extended tool life. Available in FIREX® coated or bright finished as stocked standards.
Features Back To Top
- Reduced wear
- High feed rates available
- Optimal chip evacuation
- Can be applied for roughing or finishing
Tech Specs Back To Top
Brand | Guhring |
---|---|
Chamfer Decimal | 0.0012" |
Chamfer Metric | 0.03 mm |
Coating | FIREX |
Coolant | without |
Decimal Inch (dia) | 0.0626 |
Fractional Diameter | 1/16" |
Helix Angle | 45° |
Length of Cut | 1/8 |
Material | Solid Carbide |
Metric Diameter | 1.59 mm |
Number of Flutes | 3 |
Overall Length | 1-1/2 |
Overall Length (decimal) | 1.5000 |
Overall Length (mm) | 38.1 |
Series | 3086 |
Shank Dia | 1/8 |
Shank Dia (decimal) | 0.1250 |
Shank Diameter (mm) | 3.175 |
Shank Type | HA |