5/16 Inch Diameter Endmill, 5/16 Shank, 4 flutes, 13/16 Length of Cut, Carbide, nano-A Coated, HA/HB Shank, 2-1/2 Overall Length, 36/38° Helix Angle, 0.012 chamfer
The RF100 VA/NF rougher incorporates the same 36°/38° variable helix design of the RF100 VA with the addition of a roughing profile that requires less power consumption and cutting pressure under difficult machining conditions.
Features Back To Top
- Decreased cutting pressure and power consumption
- Vibration-free operation
- Increased feed rates possible
- Increased surface qualities (R? = 2-3 µm)
- Improved tool life
Tech Specs Back To Top
| Brand | Guhring |
|---|---|
| Chamfer Decimal | 0.0120" |
| Chamfer Metric | 0.30 mm |
| Coating | Nano-A |
| Decimal Inch (dia) | 0.3125 |
| Fractional Diameter | 5/16" |
| Helix Angle | 36/38° |
| Length of Cut | 13/16 |
| Material | Solid Carbide |
| Metric Diameter | 7.94 mm |
| Number of Flutes | 4 |
| Overall Length | 2-1/2 |
| Overall Length (decimal) | 2.5 |
| Overall Length (mm) | 63.5 |
| Series | 3081 |
| Shank Dia | 5/16 |
| Shank Dia (decimal) | 0.3125 |
| Shank Diameter (mm) | 7.94 |
| Shank Type | HA/HB |
