5/8 Inch Diameter Endmill, 5/8 Shank, 4 flutes, 1-1/4 Length of Cut, Carbide, HA/HB Shank, 3-1/2 Overall Length, 40/42° Helix Angle, 0.014 chamfer
Aluminum is the primary material for the RF100 A variable helix end mill. The 40°/42° variable helix angles and rake face angles are optimally suited for long chipping materials as well as non-ferrous materials. Available bright finished.
Features Back To Top
- Suitable for roughing and finishing
- Up to 60% higher feed rates
- Up to 4-times longer tool life
- Vibration-free operation
- Improved workpiece surface quality
Tech Specs Back To Top
Brand | Guhring |
---|---|
Chamfer Decimal | 0.0140" |
Chamfer Metric | 0.36 mm |
Decimal Inch (dia) | 0.6250 |
Fractional Diameter | 5/8" |
Helix Angle | 40/42° |
Length of Cut | 1-1/4 |
Material | Solid Carbide |
Metric Diameter | 15.87 mm |
Number of Flutes | 4 |
Overall Length | 3-1/2 |
Overall Length (decimal) | 3.5 |
Overall Length (mm) | 88.9 |
Series | 3077 |
Shank Dia | 5/8 |
Shank Dia (decimal) | 0.6250 |
Shank Diameter (mm) | 15.88 |
Shank Type | HA/HB |