1 Inch Diameter Endmill, 1 Shank, 4 flutes, 1-1/2 Length of Cut, Carbide, nano-Si Coated, HA/HB Shank, 4 Overall Length, 36/38° Helix Angle, 0.031 chamfer
The RF100 VA/NF rougher incorporates the same 36°/38° variable helix design of the RF100 VA with the addition of a roughing profile that requires less power consumption and cutting pressure under difficult machining conditions.
Features Back To Top
- Decreased cutting pressure and power consumption
- Vibration-free operation
- Increased feed rates possible
- Increased surface qualities (R? = 2-3 µm)
- Improved tool life
Tech Specs Back To Top
Brand | Guhring |
---|---|
Chamfer Decimal | 0.0310" |
Chamfer Metric | 0.79 mm |
Coating | Nano-Si |
Decimal Inch (dia) | 1.0000 |
Fractional Diameter | 1" |
Helix Angle | 36/38° |
Length of Cut | 1-1/2 |
Material | Solid Carbide |
Metric Diameter | 25.40 mm |
Number of Flutes | 4 |
Overall Length | 4 |
Overall Length (decimal) | 4 |
Overall Length (mm) | 101.6 |
Series | 3060 |
Shank Dia | 1 |
Shank Dia (decimal) | 1.0000 |
Shank Diameter (mm) | 25.4 |
Shank Type | HA/HB |