3/16 (.1875) Dia., Style B - Burr Type End Cut, FC1 Coated 5600 Composite Burr/Router
Fullerton's 5600 Series MATRX PB-1 Burrs produces clean shearing of material's fibers and allows for aggressive removal rates. The MATRX PB-1 Burr's increased relief angles deliver results without tearing fibers and provides minimal delamination.
Features Back To Top
- Right & Left Hand Spiral
- Right Hand Cut
- Available in Style A - No End Cut, Style B - Burr Style End Cut, Style C - End Mill End Cut and Style D - 135� Drill Point
- Available uncoated and with FC-1 CVD Diamond Coating
- Metric and Inch Based Tools
- Dura Carb IIID (diamond coatable micrograin)
- Shank Diameter Tolerance: +.0000""-.0005"" / +0.000-0.013mm
- Cutter Diameter Tolerance: +.0000""-.0005 / +0.000-0.013mm
Tech Specs Back To Top
Brand | Fullerton |
---|---|
Coating/Finish | FC1 |
Coolant Through | No |
Decimal Diameter | 0.1875" |
Direction of Cut | RH |
End Type | SE |
End Type Character Designation | RB |
Flute Length (Decimal Inch) | 0.6250 |
Flute Length (Inch) | 5/8 |
Flute Length (mm) | 15.88 |
Flute Spiral Direction | RH |
Fractional Diameter | 3/16" |
Metric Diameter | 4.76 mm |
Number of Flutes | 8 |
Overall Length (Decimal Inch) | 2.0000 |
Overall Length (Inch) | 2 |
Overall Length (mm) | 50.80 |
Point End Type | Style B - Burr Type End Cut |
Series | 5600 |
Shank Diameter (Decimal Inch) | 0.1875 |
Shank Diameter (Inch) | 3/16 |
Shank Diameter (mm) | 4.76 |
Weldon Flat | No |