1/8 (.1250) 5-Flutes, Chipbreaker FC1 Coated Solid Carbide 5500 Composite End Mill- .010CR
Fullerton's 5500 Series MATRX EM-1 End Mills multi-flute design allows for ultimate material removal rates. The MATRX EM-1 allows for high shear and low cutting forces that provide a clean edge without fibers. Chipbreakers produce a clean shearing of fibers.
Features Back To Top
- 5 Flutes
- Standard Flute
- Chipbreakers
- Right Hand Spiral
- Right Hand Cut
- Available in Ball and Radius End Types
- Available uncoated and with FC-1 CVD Diamond Coating
- Metric and Inch Based Tools
- Dura Carb (Micrograin)
- Shank Diameter Tolerance: +.0000""-.0005"" / +0.000-0.013mm
- Cutter Diameter Tolerance: +.0000""-.0005 / +0.000-0.013mm
Tech Specs Back To Top
| Brand | Fullerton |
|---|---|
| Coating | FC1 |
| Coolant Through | No |
| Decimal Cutting Diameter | 0.1250" |
| Direction of Cut | RH |
| End Type | SE |
| End Type Character Designation | R |
| Flute Length (Decimal Inch) | 1.0000 |
| Flute Length (Inch) | 1 |
| Flute Length (mm) | 25.40 |
| Flute Spiral Direction | RH |
| Fractional Cutting Diameter | 1/8" |
| Length | Standard |
| Length Designator | SD |
| Metric Cutting Diameter | 3.18 mm |
| Metric/Inch | Inch |
| Number of Flutes | 5 |
| Overall Length (Decimal Inch) | 3.0000 |
| Overall Length (Inch) | 3 |
| Overall Length (mm) | 76.20 |
| Point End Type | Corner Radius |
| Radius Decimal | 0.0100" |
| Radius Metric | 0.25 mm |
| Series | 5500 |
| Shank Diameter (Decimal Inch) | 0.1250 |
| Shank Diameter (Inch) | 1/8 |
| Shank Diameter (mm) | 3.18 |
| Weldon Flat | No |
