1/2 (.5000) 5-Flutes, Chipbreaker Solid Carbide 5500 Composite End Mill- .030CR
Fullerton's 5500 Series MATRX EM-1 End Mills multi-flute design allows for ultimate material removal rates. The MATRX EM-1 allows for high shear and low cutting forces that provide a clean edge without fibers. Chipbreakers produce a clean shearing of fibers.
Features Back To Top
- 5 Flutes
- Standard Flute
- Chipbreakers
- Right Hand Spiral
- Right Hand Cut
- Available in Ball and Radius End Types
- Available uncoated and with FC-1 CVD Diamond Coating
- Metric and Inch Based Tools
- Dura Carb (Micrograin)
- Shank Diameter Tolerance: +.0000""-.0005"" / +0.000-0.013mm
- Cutter Diameter Tolerance: +.0000""-.0005 / +0.000-0.013mm
Tech Specs Back To Top
| Brand | Fullerton |
|---|---|
| Coating | None |
| Coolant Through | No |
| Decimal Cutting Diameter | 0.5000" |
| Direction of Cut | RH |
| End Type | SE |
| End Type Character Designation | R |
| Flute Length (Decimal Inch) | 2.3750 |
| Flute Length (Inch) | 2-3/8 |
| Flute Length (mm) | 60.33 |
| Flute Spiral Direction | RH |
| Fractional Cutting Diameter | 1/2" |
| Length | Standard |
| Length Designator | SD |
| Metric Cutting Diameter | 12.70 mm |
| Metric/Inch | Inch |
| Number of Flutes | 5 |
| Overall Length (Decimal Inch) | 5.0000 |
| Overall Length (Inch) | 5 |
| Overall Length (mm) | 127.00 |
| Point End Type | Corner Radius |
| Radius Decimal | 0.0300" |
| Radius Metric | 0.76 mm |
| Series | 5500 |
| Shank Diameter (Decimal Inch) | 0.5000 |
| Shank Diameter (Inch) | 1/2 |
| Shank Diameter (mm) | 12.70 |
| Weldon Flat | No |
